Vynagrip Matting

What Vynagrip does before someone slips on a wet deck

Around a pool, in a locker room, or behind a wet bar, the floor is the part of the room you stop noticing — right up until a foot goes out from under someone. It's easy to assume a textured tile or a quick wipe-down has it covered. The trouble is that water has nowhere to go on a flat surface, so it sits in a thin film exactly where people walk barefoot or in wet shoes.

Vynagrip is built to break that film. Its open-grid surface lets water drain straight through to the floor below, so the top of the mat stays in contact with feet instead of with a puddle. The raised diamond tread gives shoes and bare skin something to bite into. That combination is what separates a real non-slip pool mat from one that only looks grippy while it's dry.

A slick pool deck or wet-area floor isn't a small problem. The National Floor Safety Institute points to wet, hard floors as one of the most common settings for slip-and-fall injuries, and a busy deck or beverage station sees a steady stream of wet feet all day. Matting that keeps traction underfoot while the water disappears below is doing safety work, not decoration.

Why an open-grid PVC build, and why this one

Vynagrip is made from flexible, non-porous PVC in a two-layer, open-grid construction. Non-porous matters more than it sounds. Because water and spills can't soak into the material, the mat doesn't hold moisture the way a fabric or foam surface would — so it won't turn into a home for bacteria or mildew in a damp pool area or shower room.

The two-layer grid is what makes the drainage work. Water passes through the open pattern on top and clears out underneath, so the walking surface stays usable even when the deck around it is soaked. On traction, the surface is rated R11 under DIN 51130 and scores 72–88 wet on the ASTM E303 pendulum test — strong numbers for a barefoot, wet-area mat.

It's also tougher than a pool mat strictly needs to be, which is the point: it holds up. The PVC resists most acids, alkalines, and oils, and it stays workable across a wide temperature range, from well below freezing up to 140°F. The two-layer build adds a little give underfoot too, so standing on it for a while is easier on your legs than standing on bare concrete.

Where it belongs — and what it isn't

Vynagrip earns its place anywhere water and foot traffic meet. Think pool decks and the walkway from the pool to the locker room, shower and changing areas, the floor behind a poolside bar or beverage station, and wet work zones in kitchens, food service, and refrigerated spaces. In each of these, the same job repeats: drain the water, keep the grip.

It helps to be clear about what this mat is not. It's a walk-on surface mat, not a flotation device, and it's not the liner-protector cloth that goes underneath an above-ground pool. If you're looking for a mat to put under a pool or a float for in the water, this isn't that product. Vynagrip works on top of the deck, under your feet — whether that deck is concrete, tile, or paver.

One honest note for outdoor use: the PVC itself resists sun degradation, but the red color isn't colorfast in constant direct sunlight, so a red mat in full sun will fade over time. For exposed outdoor decks, the darker colors are the safer pick. In shaded or indoor wet areas, color holds up fine.

Three Things to Check Before You Spec It

Vynagrip is straightforward to order, but three things decide whether you get the right setup the first time.

First, decide between rolls and modules. Rolls come in 33-foot lengths and standard widths, and they're easy to cut to fit on site — the right call for covering a long deck or an open wet-area floor. Modules arrive pre-cut with finished ramped edging on three sides, so they sit cleanly against a wall or workstation without a trip lip.

Second, match the format to your edges. An open run of matting in the middle of a floor is one thing; a mat people step onto from a dry surface is another. Where a clean transition matters — a doorway, the edge of a bar, the lip of a shower — ramped edging keeps the change in height gentle, so the mat itself doesn't become the thing someone trips on.

Third, plan for sun and heat. Outdoors, choose a darker color and keep the red for shaded or indoor spots. Also know that PVC can shrink slightly — up to about 2% — and heat speeds that up, so on a hot, exposed deck, leave a little room at fixed edges rather than butting the mat tight wall to wall.

Why Mats Inc.

We've been matching mats to real floors since 1964, and wet areas are where the wrong choice shows up fastest. We'll help you size Vynagrip to your actual deck or work zone, talk through rolls versus modules for your layout, and flag the details — edging, color, sun exposure — that catch people out after a mat ships. It's part of our wider lineup of pool and wet-area matting, and every order is backed by our 1-year limited warranty.

Frequently Asked Questions

What is Vynagrip actually made of, and why does that matter near water?

Answered by Dustin Thompson, Owner & CEO

It's a flexible, non-porous PVC mat built in two layers, with an open-grid top and a diamond tread. The non-porous part is the key for wet areas — water and spills can't soak in, so the mat doesn't stay damp or trap the bacteria and mildew that build up on surfaces holding moisture. The open grid lets water drain straight through instead of pooling on top, which is what keeps the walking surface grippy when everything around it is wet.

How slip-resistant is it when the deck is soaking wet?

Answered by Dustin Thompson, Owner & CEO

Wet traction is exactly what it's built for. The surface is rated R11 on the DIN 51130 ramp test and scores 72–88 wet on the ASTM E303 pendulum test, both of which point to strong grip with water present. It also drains at the V10 level, so water keeps moving off the top rather than sitting under your feet. On top of that, the PVC shrugs off most acids, alkalines, and oils and works from below freezing up to 140°F, so a hot deck or a chemical splash won't break it down.

Does it come in rolls or tiles, and can I get a custom size?

Answered by Dustin Thompson, Owner & CEO

Both. You can order it as a roll in 33-foot lengths and 2-, 3-, or 4-foot widths, which you cut to fit on site — good for long decks and open floors. Or you can order modules at 4' x 2'5" or 5' x 3' that arrive with finished ramped edging on three sides, ready to drop against a wall or bar. If your space is an odd shape, custom sizes are available on request.

Can I use this outside around the pool, or is it really an indoor mat?

Answered by Jinna Hopson, VP of Marketing

It works in both, and the pool deck is one of its best homes. Outdoors it handles weather and a wide temperature swing without getting brittle, so it's at ease on an open deck, a poolside path, or a shower and changing area. The one thing to plan for outside is sun: pick a darker color for spots in constant direct sunlight, since the red can fade out there over time. Indoors and in shade, any color holds up.

What does it look like, and what colors can I get?

Answered by Jinna Hopson, VP of Marketing

It has a clean, open diamond-grid look that reads as purposeful rather than busy — like it belongs in a working wet area, not like an afterthought. It comes in black and red as standard. Black is the easy choice for hiding the bits of grit and debris a pool deck collects, while red can mark off a zone or add a little contrast. Just remember the red is best kept out of full, constant sun.

My deck has an awkward layout — will this actually fit it?

Answered by Jinna Hopson, VP of Marketing

Most likely, yes, and that's one of its strengths. Because the rolls cut easily on site, you can shape a run around steps, drains, ladders, and corners instead of forcing your space to match a fixed mat size. For built-in spots like a bar floor or a recessed changing area, the modules with ramped edges give you a finished look. And if nothing standard works, you can have it made to a custom size to fit the exact footprint you've got.

Written by Dustin Thompson, Owner & CEO, Mats Inc.