Smooth Marbleized Vinyl Switchboard Matting (Mil Spec)

Smooth Marbleized Vinyl Switchboard Matting is a high-quality insulating mat designed for use around electrical apparatus and circuits. Approved by the Department of the Navy and available for use by all branches of the Department of Defense, this matting ensures personnel safety in environments where electrical exposure is a risk.

Key Features of Smooth Marbleized Vinyl Switchboard Matting

• Military Specification Compliance: Conforms to MIL-DTL-15562G (formerly MIL-M-15562F), TYPE I, meeting strict safety standards for use in military and industrial applications.
• Dielectric Strength: Tested to handle 30,000 VAC, providing excellent insulation against high voltage exposure in critical areas.
• Proof Tested Surface: Each mat undergoes proof testing over its entire surface at 15,000 VAC, ensuring consistent safety and reliability.
• Maximum Use Voltage: Recommended for electrical environments where the voltage does not exceed 3,000 VAC, offering optimal protection.
• Marbleized Design: Available in a marbleized blue color, this matting combines functionality with an aesthetically pleasing design for industrial and professional settings.
• Available in Convenient Sizes: Supplied in 36" x 75' rolls with a 1/8" thickness, perfect for covering large areas with durable protection.

Reliable Protection for Electrical Safety

Smooth Marbleized Vinyl Switchboard Matting (Mil Spec) is the ideal solution for insulating floors in environments with electrical circuits and equipment. Built to meet military standards, this matting provides essential protection against electrical hazards, ensuring a safe workspace in military, industrial, and commercial settings.

↑

Oil Absorbing Mats with Tray

Ensure a clean and safe workspace with our oil absorbing mat. These are specifically designed to soak up coolants, solvents, oils, and water, making them an essential tool for maintaining cleanliness in any industrial setting.

• Superior Absorption: Made from 100% recycled post-consumer fibers, these pads efficiently soak up oils, coolants, solvents, and water.
• Versatile Use: Ideal for garages, workshops, and industrial environments where spills are common.
• Quick Response: Rapid absorption capacity reduces cleanup time and increases efficiency.
• Eco-Friendly Option: Constructed from environmentally friendly materials, these mats are both effective and sustainable.
• Durability: Features mid-range abrasion resistance, making it suitable for moderate foot traffic areas.
• Practical Design: Excellent for use in pathways leading into offices and other clean spaces, helping to maintain cleanliness and safety.
• Complete Set: Our oil absorbing mat set includes a reusable nitrile rubber tray and 12 disposable pads, providing convenience and long-term usability.

What Dri-Dek does before standing water turns a floor slick and moldy

In a shower, sauna, locker room, or pool deck, water doesn't just make the floor slick — it sits. A flat surface, even a textured one, holds a film of water right where bare feet land, and the warm, damp film that lingers between uses is exactly what mold, mildew, and germs feed on. Mopping buys you a few minutes; the water comes back.

Dri-Dek solves it from a different angle: it lifts you above the water. Each tile is a raised, knobby, perforated grid, so water drains straight through and flows away underneath while you stand on the dry high points on top. Air circulates in the gap below, so the floor actually dries between uses instead of staying wet. You get grip up top and a floor that isn't a permanent puddle.

That combination matters in barefoot wet areas. Hygiene and cleaning authorities like ISSA stress that standing water and damp, hard-to-dry floors are what drive both slip risk and microbial growth in showers and locker rooms. A surface that keeps feet up out of the water and lets the floor beneath dry is tackling the slip and the mold problem at the same time.

Why an interlocking raised-vinyl build, and why this one

Dri-Dek is molded from a tough, UV-stabilized virgin vinyl in a flame- and chemical-resistant formulation, which is what lets it live on a wet floor for years. It resists the inorganic acids, oils, grease, detergents, and brine that wet areas and cleaning routines throw at it, holds up from -30°F to 167°F, and carries UV stabilizers so outdoor sun doesn't break it down. The same material is made to resist mold, mildew, and bacteria rather than harbor them.

The design is the other half. Each 12-by-12-inch tile is 9/16 inch thick with a knobby, perforated top, so it drains in every direction and cushions underfoot at the same time — the flex in the raised knobs takes some of the ache out of standing on hard concrete or tile. It's also flame resistant, having passed the UL 94V-0 vertical flame test, and it's tough, with a tensile strength around 2,750 PSI.

Best of all, it goes down without a contractor. The tiles, sheets, and rolls snap together on all four sides to build a surface of any size or shape, and they trim with a knife to fit wall-to-wall or around a drain, a bench, or a corner. Beveled edge and corner pieces finish the exposed borders into gentle ramps. When it's time to clean, you hose it, pressure-wash it, or lift a section and rinse under it.

Where it belongs — and what it isn't

Dri-Dek is at home anywhere a floor gets wet and stays wet. That's pool decks and pool surrounds, showers, saunas, steam and changing rooms, locker rooms, and the damp ring around a spa or hot tub. Because it interlocks into any shape and handles sun and temperature swings, it works indoors and out, in commercial facilities and in a home bathroom, basement, or patio alike.

It helps to be clear about what this isn't. It's a walk-on modular floor surface, not a flotation device, and not the liner sheet that goes under an above-ground pool. If you want a mat to put under a pool or a float for the water, this isn't that product. Dri-Dek installs on top of your existing floor — concrete, tile, or decking — and turns it into a dry, draining surface.

One honest note on chemistry: the vinyl resists most acids, oils, and solvents, but a few aggressive industrial solvents are the exception, so for a specialized chemical environment it's worth checking the specifics with us. In a normal pool, shower, or locker-room setting, chlorine, cleaning products, and daily wear are well within what it's built to take.

Three Things to Check Before You Spec It

Dri-Dek is simple to order once you've settled three things.

First, choose your format. Loose 1-by-1-foot tiles are the most flexible for a small or intricate space and for lifting individually to clean. Pre-assembled 3-by-4-foot sheets or 3-by-12-foot rolls cover a big pool deck or locker room far faster, snapping to each other just like the tiles. Many jobs mix them: rolls for the open floor, loose tiles to fill the edges.

Second, plan your edges. Wherever the surface meets open floor that people step onto, the beveled edge strips and corner pieces turn the 9/16-inch height into a gentle ramp, so there's no lip to trip on and carts or wheelchairs can roll on. Decide which sides are exposed before you order so you have the right trim on hand.

Third, pick a color with the room in mind. It comes in twelve colors, so you can go practical or design-led. Pool Blue and Blue lean fresh and aquatic on a deck; gray, black, and almond read neutral and hide grit in a locker room; brighter colors can zone an area or match a brand. Darker, muted tones show debris the least between cleanings.

Why Mats Inc.

We've been matching mats to real floors since 1964, and a wet floor is one place where the right surface pays off every single day. We'll help you work out how many tiles, sheets, or rolls your space needs, which edge and corner pieces to add, and which of the twelve colors suits the room — and we'll flag anything about your setting that matters before you order. It's part of our wider lineup of pool and wet-area matting, and every order is backed by our 1-year limited warranty.

Frequently Asked Questions

How does Dri-Dek keep you out of the water, exactly?

Answered by Dustin Thompson, Owner & CEO

It works by lifting you above the floor instead of just draining the top. Each tile is a raised grid of knobs with a perforated, open surface, so water falls straight through and flows away underneath while your feet rest on the dry high points. The gap beneath lets air move and the floor dry between uses, which is what stops the standing water and the mold and mildew that come with it. It's molded from a tough, UV-stabilized vinyl in a flame- and chemical-resistant formulation built to live in that wet environment.

Will it hold up to chlorine, sun, and years of wet use?

Answered by Dustin Thompson, Owner & CEO

It's built for exactly that. The vinyl resists inorganic acids, oils, grease, detergents, and the brine and chlorine of a pool environment, and it's UV-stabilized so sun doesn't make it brittle — in weatherometer testing it held around 98 to 99 percent of its tensile strength and color. It works continuously from -30°F to 167°F, so an outdoor deck through summer and winter is no problem, and it passed the UL 94V-0 vertical flame test. A couple of aggressive industrial solvents are the exception, so for a specialized chemical setting, check with us first.

How do the tiles, sheets, and rolls differ, and which should I get?

Answered by Dustin Thompson, Owner & CEO

They're the same surface in three formats, and they all interlock with each other. Loose 1-by-1-foot tiles are the most flexible — best for small or intricate spaces and for lifting one at a time to clean under. The 3-by-4-foot sheets and 3-by-12-foot rolls are pre-assembled tiles that cover a big pool deck or locker room much faster. Most large jobs mix them: rolls or sheets for the open floor, loose tiles to fill in edges and odd corners.

Where does Dri-Dek work best?

Answered by Jinna Hopson, VP of Marketing

Anywhere a floor gets wet and stays wet, indoors or out. It's a natural on pool decks and surrounds, in showers, saunas, steam and changing rooms, and locker rooms, and around the damp base of a spa or hot tub. Because it snaps into any shape and handles sun and temperature swings, it's just as at home in a commercial aquatic center as in a home bathroom, basement, mudroom, or patio. If the floor gets wet, it has a place there.

What colors does it come in, and how should I choose?

Answered by Jinna Hopson, VP of Marketing

It comes in twelve colors, which is part of what makes it easy to fit a space rather than fight it. Pool Blue and Blue feel fresh and aquatic on a deck or around a spa; gray, black, and almond read neutral and professional in a locker room and hide grit well; and the brighter colors — red, yellow, teal, green — can zone an area or pick up a facility's branding. If you want the floor to disappear and stay looking clean between washes, the darker, muted tones show the least debris.

My space is an odd shape — can I make it fit, and even design a pattern?

Answered by Jinna Hopson, VP of Marketing

Yes, and that's one of the best things about it. Because every piece interlocks on all sides and trims with a knife, you can build a surface to any footprint — around a drain, a bench, a curved pool edge — and finish the exposed sides with beveled edge and corner pieces for a clean, ramped border. And since it comes in twelve colors, you can mix them to create borders, lanes, or a simple pattern, or match a brand color. Send us your layout and we'll help you plan the pieces and colors.

Written by Jinna Hopson, VP of Marketing, Mats Inc.

Wide Rib Vinyl Runner Matting is a versatile, durable flooring solution designed to enhance safety and protect floors in high-traffic areas. Its round ribbed surface provides superior traction and slip resistance, making it ideal for both industrial and commercial environments. This matting is easy to install, maintain, and clean, offering long-lasting performance with minimal upkeep.

• Wide ribbed surface offers enhanced traction and reduces the risk of slips and falls.
• Provides effective floor protection against wear, dirt, and moisture.
• Easy to install and maintain, ensuring long-lasting use with minimal effort.
• Meets FMVSS 302 flammability requirements
• Oil, grease, and chemical resistant

Needle Rib Matting is a low-profile, linear-ribbed entrance mat built for lighter-traffic doors — side entrances, small storefronts, boutiques, and interior thresholds that see foot traffic but not a flood of it. The close ribbed surface wipes moisture off shoes and holds it on the mat, so a smaller entrance stays cleaner and the floor past it stays drier.

What Needle Rib Matting Does Before Water Reaches Your Floor

Even a quiet entrance lets dirt and water in on shoes. ISSA field data shows a building takes on up to 12 times more dirt during wet weather, and it takes six to eight steps to walk a sole dry. A mat at a lighter-traffic door is what keeps that moisture from spreading onto the floor just past it.

Needle Rib leans on moisture. The linear ribbed surface scrapes off light grit and, more importantly, pulls water off shoes and holds it in the mat — it's a strong moisture-retaining mat first and a light scraper second. The vinyl backing keeps that trapped water off the floor underneath rather than letting it bleed through.

Why a Ribbed Needle-Punched Surface, and Why This One

The surface is a needle-punched blend of polypropylene and polyester fiber, made with 50% recycled PET content. The linear rib runs the length of the mat, which is what gives it its action — shoes cross the ribs and leave moisture behind in the channels. The fiber is quick-drying and fade-resistant, so it dries between uses and keeps its color.

Underneath is a DINP-free PVC vinyl backing that holds the mat to the floor and protects it from the moisture the mat collects. This is a lighter-duty construction than a heavy bi-level rubber mat — which is the point. It's matched to lighter traffic, where a heavyweight mat would be more than the door needs.

Where It Belongs (and Where It Doesn't)

This mat is for interior, light-traffic spots — small businesses, boutiques, side and secondary entrances, back offices, and similar doors that don't take a constant stream of people. It's also certified high-traction by the National Floor Safety Institute, so a smaller entry still gets a safe, slip-resistant surface.

Where it's the wrong call is a busy main entrance or any outdoor spot. Put a light-traffic mat under heavy footfall and the surface crushes and saturates fast, and it stops doing its job; outdoors it isn't built for weather at all. For a high-traffic front door, step up to a heavier bi-level mat, and keep Needle Rib for the lighter doors it's sized for.

Three Things to Check Before You Spec It

Three things decide whether Needle Rib fits your entrance.

First, the traffic. This is a light-traffic mat — right for a side door or a small shop, wrong for a main lobby that sees hundreds of people a day. Match the mat to the footfall, or a busier door will wear it down before its time.

Second, the size and shape. It comes in standard sizes from 2'×3' up to 6'×10', plus 60-foot rolls cut to length — but only in standard widths, with no custom width cuts. Plan around the standard widths, and size the length to cover the steps it takes to dry a sole.

Third, the floor and the finish. The vinyl backing suits hard floors and low carpet and protects the surface beneath from trapped moisture. If the mat will sit out in the open rather than wall-to-wall, order edged ends, since standard rolls ship without edging unless you ask.

Why Mats Inc.

Mats Inc. has specified commercial matting since 1964, so when a door doesn't need a heavyweight mat, we'll tell you — and point you to the one that's actually sized for the traffic instead of putting more mat at the door than the spot calls for. We help you match construction to footfall, pick sizes that fit, and set up a matting plan across a building's doors. For the rest of the indoor range, see our all indoor entrance mats.

Frequently Asked Questions

How does the ribbed surface clean shoes?

Answered by Dustin Thompson, Owner & CEO

The surface is a linear ribbed fiber — rows of raised ribs running the length of the mat. As someone walks across, the ribs scrape light grit off the shoe and, more importantly, the fiber pulls moisture off the sole and holds it in the channels between the ribs. It's built to retain water rather than just push it around, so a wet shoe leaves most of its moisture on the mat. The vinyl backing then keeps that water off the floor underneath instead of letting it soak through.

How much traffic can it take?

Answered by Dustin Thompson, Owner & CEO

It's rated for light traffic — think a side entrance, a small shop, or a back-office door, not a main lobby. In the right spot it holds up well for years; in the wrong one it wears out fast. A light-traffic mat under heavy footfall crushes flat and saturates, and once it does that it stops scraping and holding water and just sits there wet.

So the honest answer is that durability here is about matching the mat to the door. Kept to the lighter traffic it's made for, and cleaned regularly, it keeps working and protecting the floor. Pushed past that, it gives up early.

Can I use it outdoors or at a busy main entrance?

Answered by Dustin Thompson, Owner & CEO

Neither is a good fit. Needle Rib is an interior, light-traffic mat — it isn't built for weather, so outdoor use is out, and a busy main entrance will overwhelm it. The better setup is to use it where it belongs — a quieter interior door — and put a heavier bi-level mat at the high-traffic front entrance and a coarse scraper outside. Matching each door to the right mat keeps more dirt and water off your floors than stretching one light mat past what it's made for.

What sizes can I get, and can it be cut to fit?

Answered by Jinna Hopson, Vice President of Marketing

It comes in standard sizes from 2'×3' up to 6'×10', and in 60-foot rolls that can be cut to length. The one limit is width: there are no custom width cuts, so you work within the standard widths rather than a made-to-measure size.

Size the length to cover the steps it takes to dry a sole, not just the doorway. And if the mat will sit out in the open rather than wall-to-wall, ask for edged ends — standard rolls ship without edging unless you specify it.

What does it look like, and what colors are there?

Answered by Jinna Hopson, Vice President of Marketing

It has a simple, low-profile linear-rib look — clean and unobtrusive rather than decorative, which suits a small shop or a quiet interior door where you want the mat to blend into the space. There are four colors: Blue, Brown, Charcoal, and Gray. The darker tones like Charcoal and Brown hide tracked-in dirt better between cleanings, which helps a lighter-traffic mat keep looking tidy without constant attention.

Can I get it in a custom size or with a logo?

Answered by Jinna Hopson, Vice President of Marketing

Not really, on either count. There are no custom width cuts — you choose from standard widths, with rolls cut to length — and this is a plain ribbed mat, not a logo or printed construction. If you need a branded mat for the same kind of entrance, that's a different product — a logo mat — and we can point you to one. For a simple, clean mat that holds moisture at a lighter-traffic door, Needle Rib does that job without the extras.

By Dustin Thompson, Owner & CEO, Mats Inc.

Rely-On Olefin Matting

Rely-On Olefin Matting offers a practical and economical solution for floor protection in light-traffic areas. Made from durable olefin carpet fibers, this matting is designed to capture dirt and moisture, helping to maintain a clean and safe environment. Its low-profile design allows for easy placement in entryways, lobbies, and other indoor spaces.

Key Features of Rely-On Olefin Matting

• Durable Olefin Fibers: Made from tough olefin fibers, this matting is built to handle light foot traffic while effectively trapping dirt and moisture.
• Moisture Absorption: The olefin carpet fiber quickly absorb moisture, keeping floors dry and reducing the risk of slips and falls.
• Low-Profile Design: The slim design ensures easy placement in doorways and prevents tripping hazards, making it ideal for entryways and lobbies.
• Easy to Clean: Designed for minimal maintenance, this matting can be vacuumed or shaken out to remove debris, ensuring it remains functional and attractive.
• Cost-Effective Solution: A budget-friendly choice for maintaining cleanliness in indoor spaces without compromising on quality or performance.
• Versatile Applications: Perfect for use in offices, commercial buildings, or residential settings where light traffic is expected.

Perfect for Light-Traffic Areas

Rely-On Olefin Matting is the ideal choice for keeping light-traffic areas clean, dry, and safe. Its durable construction and moisture-absorbing capabilities make it a reliable and cost-effective option for maintaining floor cleanliness in various indoor environments.

Safety Step rubber mats take a different approach to wet-area matting: instead of one big mat, you build the footprint you need from 3-by-3-foot modular sections with molded-in connectors on two sides. Perforations drain water and oil through the surface, cushioned rubber eases long standing shifts, and when one section finally wears out, you replace that section — not the whole installation.

What Safety Step Does Before a Layout Outgrows Its Matting

Most wet-area mats are cut to a rectangle and stay that way. Work areas aren't. Lines wrap around equipment, stations get added, a sanding cell moves across the shop — and a fixed mat that fit last year now leaves gaps where feet land on bare, wet floor.

A modular anti-fatigue mat solves that at the design level. Sections connect into whatever shape the work takes, wrap odd corners, and re-assemble when the layout changes. Underneath, a multi-nib backing lifts the whole surface off the floor so drained liquid keeps moving and the floor beneath can actually dry, instead of holding a wet film under the rubber.

Why This Construction, and Why This One

The mat comes in two compounds, and choosing between them is most of the spec decision. The black version is general-purpose rubber for wet duty — water, washdowns, standard cleaners — with recycled content up to 47%. The terra cotta version is a nitrile rubber blend built to resist grease, for kitchens and stations where oil reaches the floor daily.

Both wear hard: surface loss measures at or under 1% after 1,000 abrasion cycles on the standard test. And both share the modular system's quiet economics — a high-wear section at the sink or the grinder swaps out individually, while the rest of the installation stays in service.

Edging is optional rather than built in. Snap-on beveled ramps finish exposed sides where traffic steps on and off; sides butted against equipment or walls can stay square. Adding edging extends the mat roughly 3 inches per finished side, which matters when you're sizing to a tight footprint.

Where It Belongs, and What It Is Not

Safety Step earns its place in factories, workstations, sanding and grinding cells, dish rooms, and food service areas — heavy-duty wet and oily zones, and especially the large or odd-shaped ones a single rectangular mat can't cover cleanly. If the matting footprint might change in the next few years, modular is the format that keeps up.

It is not a dry-station comfort mat — a salon chair or standing desk wants a solid surface, not perforations. And for one fixed, standard-sized station that will never move, a single one-piece mat from the anti-fatigue mats and runners range does the job without assembly. This mat's case is coverage that's big, irregular, or likely to change.

Three Things to Check Before You Spec It

First, what reaches the floor. Water and cleaning solution point to the black general-purpose version. Grease, fryer oil, or petroleum-based fluids point to the terra cotta nitrile blend — putting the general-purpose compound under daily grease shortens its life and turns the surface slick sooner.

Second, the true footprint. Sections are 3-by-3, custom assemblies run up to 12 by 30 feet, and workstation layouts order in full-foot increments. Sketch the actual standing and walking zone around the equipment — the point of modular is covering that real shape, not the rectangle that approximates it.

Third, the exposed edges. Count the sides where people step on and off, and spec snap-on ramps for those; remember each finished side adds about 3 inches to the overall dimension. An unramped edge in a walk path is a stubbed toe waiting for a rush.

Why Mats Inc.

Modular matting gets ordered wrong in predictable ways — the compound that doesn't match the fluids, the layout that forgot the edging inches, the section count that's one short. Send us a sketch of the work area with what lands on the floor, and we'll spec the sections, compound, and ramps so the kit that arrives assembles into the mat you actually needed.

Frequently Asked Questions

What's the difference between the black and terra cotta versions?

Answered by Dustin Thompson, Owner & CEO

The compound. Black is general-purpose rubber — right for wet zones where water and standard cleaners are the exposure, and it carries up to 47% recycled content. Terra cotta is a nitrile rubber blend formulated to resist grease and oil, which is what you want under a fry line, in a machine shop, or anywhere petroleum-based fluids hit the floor.

If you're unsure, name the messiest thing that reaches that floor in a normal week. Grease in the answer means terra cotta.

How long does a modular drainage mat like this last?

Answered by Dustin Thompson, Owner & CEO

The wear data is unusually strong: both compounds lose 1% or less of their surface after 1,000 cycles on the standard abrasion test, which puts heavy daily duty in the multi-year range — three to five years is a fair expectation with routine rinsing.

The modular format changes the replacement math, though. Wear never lands evenly — the section at the sink or the grinder goes first. Here you swap that one section and keep the rest in service, instead of retiring a whole mat because one corner died.

How do the sections install, and do they need adhesive?

Answered by Dustin Thompson, Owner & CEO

No adhesive. Each section has connectors molded into two adjoining sides, so you lay the first section at the primary work position and snap outward until the footprint is covered. Check every joint as you go — a proud seam collects debris and catches toes.

Start on a clean, dry floor, orient the assembly so drainage runs toward the floor drain, and snap ramps onto any edge that faces foot traffic. Reconfiguring later is the same process in reverse.

Will terra cotta look better than black in a kitchen guests can see into?

Answered by Jinna Hopson, VP of Marketing

Often, yes — and not just on looks. Terra cotta is the traditional working color of commercial kitchens, so in an open-kitchen or chef's-counter setting it reads as authentic professional equipment. It also happens to be the grease-resistant compound, so the aesthetic choice and the right technical choice usually point the same direction in food service.

Black suits back-of-house and industrial floors where it disappears against dark concrete. Whichever you pick, keep it consistent across connected sections — a checkerboard of mixed colors reads as patched.

What sizes can I build, and can it fit an odd-shaped area?

Answered by Jinna Hopson, VP of Marketing

Odd shapes are the point. Sections are 3-by-3 feet and connect in any direction, so an L around a prep island, a U inside a work cell, or a long dish-room run all assemble from the same units. Custom assemblies go up to 12 by 30 feet, ordered in full-foot increments.

Two sizing notes: optional edging adds about 3 inches per finished side, and it's worth ordering to the real standing zone rather than rounding down — a footprint that stops one section short leaves someone half off the cushion all shift.

Is this the right choice over a single one-piece drainage mat?

Answered by Jinna Hopson, VP of Marketing

It depends on the shape and the future. One fixed station with standard dimensions is happily served by a one-piece mat — nothing to assemble, nothing to seam. Choose modular when the area is large, wraps equipment, doesn't match stock rectangles, or is likely to be rearranged.

The section-replacement benefit tips close calls: if one spot in your layout takes far more punishment than the rest, modular means that spot never forces a full replacement.

By Dustin Thompson, Owner & CEO, Mats Inc.

What Heronair does before a wet work floor causes a fall

In a busy work area, the floor gets wet and stays wet — washdown, splashes, drips, tracked-in water. It's easy to assume a quick mop or a coat of non-slip paint keeps people safe. The catch is that water spreads into a thin film on a hard floor, right where people walk and stand, and a painted or tiled surface that grips dry can turn slick the moment it's wet.

Heronair is built to take that film out of play. It's an open-grid PVC mat that's impermeable to fluids, so water and debris drop through and disperse below the surface instead of pooling on top. The etched surface gives shoes traction, and the mat keeps draining even when the floor around it is soaked. That's the difference between a real non-slip wet-area mat and a surface that only behaves when it's dry.

A wet, slick work floor isn't a minor nuisance. The National Floor Safety Institute ties wet, hard floors to a large share of slip, trip, and fall injuries, and a walkway or wet work zone keeps feeding that risk shift after shift. A mat that drains the water away and holds grip underfoot is doing safety work the whole time it's down.

Why a lightweight tubular PVC build, and why this one

Heronair is made from non-porous PVC in a two-layer, tubular construction — and that hollow build is the heart of what makes it different. The tubes make the mat genuinely light: at around 0.9 pounds per square foot, it's easy to lift, roll, and reposition by hand. In a space where mats get pulled up for cleaning or moved between tasks, that lightness is a real day-to-day advantage.

The same open structure that keeps it light also keeps it draining. Liquids pass straight through and clear away beneath the mat, and it's certified slip resistant at R11 with V10 drainage under DIN 51130. Grip comes from an etched surface, so traction is strongest across the lines of the pattern. The hollow body also insulates against a cold floor and absorbs sound, taking some of the chill and clatter out of a hard work area.

Because people stand on these floors for hours, the cushioning matters. The give in the tubular build reduces fatigue underfoot, which is easier on legs and backs than bare concrete. The PVC itself resists most acids, alkalines, and oils, handles UV without degrading, and works from below freezing up to 140°F. Made in black, it's produced from post-industrial recycled material — averaging at least 30% recycled content — and the whole mat is 100% recyclable.

Where it belongs — and what it isn't

Heronair belongs in wet, working spaces where people are on their feet in shoes. Think light-industrial areas and walkways, washdown zones, beverage and prep stations, and the wet service and back-of-house areas around a pool — pump and equipment rooms, plant rooms, and staff walkways — rather than the barefoot deck itself. Wherever liquids underfoot meet standing workers, it earns its place.

It's worth being clear about what this mat is not. It's a shod, walk-on work mat — not a barefoot-certified pool mat, not a flotation device, and not the liner sheet that goes under an above-ground pool. For the barefoot pool deck, shower, or changing room, a barefoot-rated mat is the right call. Heronair's job is the working wet floor, in shoes, where drainage and anti-fatigue support matter most.

How it goes down is simple. It comes in 33-foot rolls, cuts to fit on site, and contours to uneven surfaces, so it follows a real floor instead of fighting it. For larger areas, rolls join side-to-side and end-to-end with connector clips or welded snap track, and ramped edging finishes an exposed border so the mat doesn't become a trip point.

Three Things to Check Before You Spec It

Heronair is easy to order well once you've thought through three things.

First, match it to the duty. This is the lighter, more versatile end of wet-area matting — ideal where you want easy handling, anti-fatigue support, and reliable drainage in shoes. For the most punishing wet floors or the highest wet-grip demands, a heavier, higher-traction mat may suit better. Be honest about how hard the floor gets worked before you choose.

Second, measure the whole wet path and plan the joins. Size the mat to cover wherever liquid actually reaches — the full washdown zone, the length of a walkway — since a dry-foot gap is where the next slip waits. For bigger areas, map where rolls will join with clips or snap track and where ramped edging finishes the border.

Third, plan for heat and movement. The PVC handles a wide temperature range, but like any thermoplastic it can shrink slightly — up to about 2%, faster in heat — so in a hot space or an exposed spot, leave a little room at fixed edges rather than butting it tight wall to wall, and use edging or clips to keep sections in place.

Why Mats Inc.

We've been matching mats to real floors since 1964, and wet work areas are where the wrong mat shows up fastest — in sore legs, slick steps, and mats too heavy to bother moving. We'll help you decide whether Heronair's lightweight, easy-handling build fits your space or whether a heavier mat suits the duty, size it to your actual wet path, and plan the seams and edging. It's part of our wider lineup of pool and wet-area matting, and every order is backed by our 1-year limited warranty.

Frequently Asked Questions

What's Heronair made of, and why is it so light?

Answered by Dustin Thompson, Owner & CEO

It's made from non-porous PVC in a two-layer, tubular construction — essentially an open grid of hollow tubes. That hollow build is why it's light: about 0.9 pounds per square foot, easy to lift, roll, and move by hand. The open structure also means it's impermeable to fluids — water and debris drop straight through and clear away underneath instead of pooling on top. So the same thing that makes it light also makes it drain, and keeps the walking surface usable when the floor's wet.

How slip-resistant and tough is it, especially with chemicals around?

Answered by Dustin Thompson, Owner & CEO

It's certified slip resistant at R11 with V10 drainage under DIN 51130, with traction coming from an etched surface — grip is strongest across the lines of the pattern, reading 58 to 77 wet on the ASTM E303 pendulum test depending on direction. On toughness, the PVC resists most acids, alkalines, and oils, stands up to UV without degrading, and works from below freezing up to 140°F. That's what lets the same mat hold up in a washdown area, a chemical-prone work zone, or an outdoor walkway without going brittle.

What sizes does it come in, and can it cover a large floor?

Answered by Dustin Thompson, Owner & CEO

It comes in 33-foot rolls in 2-, 3-, and 4-foot widths, and you cut it to fit on site. For a large floor, rolls join side-to-side and end-to-end with connector clips or welded snap track, so you can cover a whole walkway or work area in one continuous surface. Because it contours to uneven ground, it follows a real floor rather than needing a perfectly flat one, and custom matting is available when a standard width won't fit.

Can I use this around a pool, or is it really a workplace mat?

Answered by Jinna Hopson, VP of Marketing

It's really a workplace mat, and that's where it shines — light-industrial areas, walkways, washdown and prep zones. Around a pool, its place is the working, in-shoes areas: pump and plant rooms, staff walkways, and back-of-house service spaces, rather than the barefoot deck or shower. For those barefoot areas you'd want a barefoot-rated pool mat instead. If your space is a wet floor where people work on their feet in shoes, Heronair fits.

What does it look like underfoot?

Answered by Jinna Hopson, VP of Marketing

It has a practical, industrial look — an open, etched grid that clearly reads as a working surface built to drain and grip, not as decoration. The standard color is black, which is the easy choice for a work area because it hides the grit, oil, and debris these floors collect between cleanings; the black version is also the one made from recycled material. Other colors are available if you want to mark off a zone or match a scheme — tell us what you need and we'll confirm the options.

My work area has an awkward layout — will it fit, and is it easy to live with?

Answered by Jinna Hopson, VP of Marketing

Yes on both counts. Because it cuts to fit on site and contours to uneven surfaces, you can shape a run around machinery, drains, and corners instead of forcing the space to match a fixed mat. And it's genuinely easy to live with day to day: it's light enough to lift or roll up for cleaning by hand, needs no special tools, and rinses down with a hose. Send us your layout and we'll help you plan widths, joins, and edging.

Written by Dustin Thompson, Owner & CEO, Mats Inc.

What Cushion Tile does before a hard, wet floor wears people out

A wet concrete or tile floor around a pool, in a plant room, or behind a counter does two kinds of damage you don't always connect. It's slick where water sits, and it's punishing to stand on for hours — hard, cold, and unforgiving on legs, backs, and feet. Most people notice the slip risk and miss the standing fatigue, but both come from the same hard, wet surface.

Cushion Tile takes on both at once. Each tile is a thick, flexible vinyl square with a waffle-grid, open-mesh surface, so it lifts your feet up out of the water while water drains away through the grid below. At the same time, the give in the recycled vinyl cushions every step, so a floor that used to punish now gives a little back. You stand drier and more comfortably on the same spot.

On a wet, hard floor, that combination matters more than it looks. Standing all day on unforgiving concrete is a genuine source of fatigue and strain, and standing water on top of it adds a slip risk. A cushioned tile that raises feet above the water and softens the surface underneath is protecting the people on it and the floor itself.

Why a recycled cushioned tile, and why this one

Cushion Tile is molded from recycled flexible vinyl, which does two useful things. It gives the tile its cushioning flex — enough to conform to an uneven floor and soften a hard surface underfoot — and it puts a recycled material to work instead of a virgin one, which matters if sustainability is part of your spec. The vinyl is grease and moisture resistant, so a wet or greasy floor doesn't break it down.

The surface is a waffle-grid, open-mesh top on a 3/4-inch-thick tile — noticeably thicker than a thin drainage mat, which is where the cushioning comes from. The open grid lets water and debris fall through and away, keeping the top of the tile clear while your feet stay up above any standing water. It guards against slipping and against the wear that vibration and moisture put on a floor.

It goes down without tools or a contractor. The 12-by-12-inch tiles interlock on every side to build a surface of any size or shape, and they trim to fit around a drain, a bench, or a corner. Interlocking beveled edge and corner pieces ramp the 3/4-inch height down to the floor for a finished, trip-free border. When it's time to clean, you lift a section, rinse, and drop it back.

Where it belongs — and what it isn't

Cushion Tile suits any hard, wet, or greasy floor where people stand or move around. That includes pool decks and surrounds, locker and changing rooms, and shower approaches, but also the wet, standing-work zones it was bred for — behind bars and counters, in plant and equipment rooms, workshops, and washdown areas. Because it handles indoors and out and conforms to an uneven floor, it covers a lot of different ground.

It's worth being clear about what this isn't. It's a walk-on cushioned floor tile, not a flotation device, and not the liner sheet that goes under an above-ground pool. If you want a mat to put under a pool or a float for the water, this isn't that product. Cushion Tile installs on top of your existing floor and turns a hard, wet surface into a cushioned, draining one.

One honest note on grip: this tile's strength is cushioning and lifting feet above the water, and its waffle surface gives solid footing for a walkway or standing area. For the most slip-critical wet spots — a steep, constantly streaming surface where aggressive traction is the priority — a coarser, grittier surface may serve better, and we can point you to one. For general wet-area comfort and safety, this is a strong fit.

Three Things to Check Before You Spec It

Cushion Tile is simple to order once you've thought through three things.

First, size the coverage and count your tiles. Each tile covers one square foot, so a deck or work zone is just its area in tiles, plus edge and corner pieces for any exposed sides. Because it's ideal for covering large surfaces, map the whole area you want cushioned and draining, not just a single standing spot.

Second, plan your edges. Wherever the tiled surface meets open floor people step onto, the beveled edge and corner pieces ramp the 3/4-inch height down so there's no lip to trip on and carts can roll on and off. Decide which sides are exposed before you order so the right ramp pieces come with the tiles.

Third, pick a color for the setting. It comes in several colors, including blue, green, gray, red, and beige, with more available. Blue and gray read clean and neutral around a pool or in a locker room; beige is easy and warm; brighter colors can zone an area or mark a walkway. Darker, muted tones show grit the least between cleanings.

Why Mats Inc.

We've been matching mats to real floors since 1964, and a hard, wet floor is one of the clearest cases for the right surface — it shows up in comfort, safety, and how the floor holds up. We'll help you work out how many tiles and edge pieces your space needs, choose a color for the room, and flag whether Cushion Tile's cushioned surface or a grittier one suits your particular wet spot. It's part of our wider lineup of pool and wet-area matting, and every order is backed by our 1-year limited warranty.

Frequently Asked Questions

How does Cushion Tile keep feet out of the water and still feel soft?

Answered by Dustin Thompson, Owner & CEO

It does both jobs with one design. Each tile is a 3/4-inch-thick square of flexible recycled vinyl with a waffle-grid, open-mesh top. The grid raises your feet above the floor and lets water drain straight through and away, so you're standing on the tile rather than in a puddle. And because the vinyl is thick and flexible, it gives underfoot — that cushioning is where the "cushion" in the name comes from. The same flex also lets it conform to a floor that isn't perfectly flat.

Will it hold up on a wet, greasy, or outdoor floor?

Answered by Dustin Thompson, Owner & CEO

It's built for exactly those conditions. The recycled vinyl is grease and moisture resistant, so a wet pool deck, a greasy back-of-house floor, or a damp plant room won't degrade it, and it works indoors or outdoors. It also guards the floor beneath it from the wear that vibration and moisture cause. At 3/4 inch thick it's a substantial tile rather than a thin mat, and while the maker rates it for years of service, through us it's backed by our 1-year limited warranty.

What size are the tiles, and can I cover a big area?

Answered by Dustin Thompson, Owner & CEO

Each tile is 12 by 12 inches — one square foot — and they interlock on every side, so you can build a surface of any size or shape by snapping more together. It's specifically suited to covering large surfaces, so a whole pool deck or work floor is very doable. The tiles trim to fit around drains, corners, and equipment, and interlocking beveled edge and corner pieces finish the exposed borders. Custom sizing is available if you need it.

Where does Cushion Tile make the most sense?

Answered by Jinna Hopson, VP of Marketing

Anywhere a hard floor is wet or greasy and people stand or move on it. Around water, that's pool decks and surrounds, locker and changing rooms, and shower approaches. It's just as at home in the standing-work spots it was designed for — behind a bar or counter, in a plant or equipment room, a workshop, or a washdown area. Because it works indoors and out and conforms to uneven ground, it fits both a poolside setting and a working back-of-house floor.

What colors does it come in, and how should I choose?

Answered by Jinna Hopson, VP of Marketing

It comes in several colors, including blue, green, gray, red, and beige, with more available. The color is a chance to fit the tile to the room: blue and gray feel clean and neutral around a pool or in a locker room, beige reads warm and low-key, and brighter shades like green or red can mark off a walkway or zone an area for safety. If you want the floor to stay looking tidy between cleanings, the darker, muted tones hide grit and debris best.

My space is an odd shape — can I make it fit, and even zone areas by color?

Answered by Jinna Hopson, VP of Marketing

Yes to both. Because every tile interlocks on all sides and trims with a knife, you can build a surface to any footprint — around a curved pool edge, a drain, or a bench — and finish the exposed sides with beveled edge and corner ramps for a clean border. And with several colors to choose from, you can mix them to mark walkways, zone a wet area, or match a facility's look. Send us your layout and we'll help you plan the tiles, edges, and colors.

Written by Dustin Thompson, Owner & CEO, Mats Inc.

Corrugated Rubber Matting

Corrugated Rubber Matting provides superior traction and floor protection in high-traffic and industrial environments. The ribbed, corrugated rubber runner surface offers enhanced slip resistance, making it ideal for wet or dry areas where safety is a priority. Its durable rubber construction ensures long-lasting performance, making it perfect for a wide range of applications, from warehouses to workshops.

Key Features of Corrugated Rubber Matting

• Slip-Resistant Surface: The corrugated rubber runner design improves grip, reducing the risk of slips and falls in both wet and dry conditions.
• Durable Construction: Made from high-quality rubber, this matting is designed to withstand heavy foot traffic and daily wear and tear.
• Floor Protection: Protects floors from damage caused by heavy equipment, tools, and other industrial activities.
• Easy to Install: Available in rolls, corrugated rubber matting is easy to cut and customize for various spaces and applications.
• Low Maintenance: Resistant to moisture and most chemicals, making it easy to clean and maintain for long-term use.
• Versatile Applications: Ideal for industrial settings, garages, warehouses, and workstations where safety and durability are essential.

Perfect for Industrial and Commercial Use

Corrugated Rubber Mats are the perfect solution for creating a safe and durable surface in industrial and commercial environments. Its slip-resistant and heavy-duty design makes it ideal for protecting both workers and floors in high-traffic areas.

Corrugated rubber matting is a durable, slip-resistant flooring material designed for high-traffic areas and industrial environments. Its corrugated surface provides enhanced traction, reducing the risk of slips and falls. This type of corrugated rubber matting is often used for floor protection and to improve safety in workplaces, entryways, and other areas prone to moisture or heavy use.