Safety Scrape Rubber Mats

A rubber scraper mat earns its place at the door by doing two jobs at once: pulling grit off shoes, and holding footing where a wet floor turns slick. Safety Scrape does both. Its molded grip surface bites in wet, greasy, and oily conditions that leave smoother mats treacherous, so it works as well inside a wet kitchen as it does outside as an exterior scraper.

What Safety Scrape Does Before a Slick Floor Becomes a Claim

The trouble with most entrance mats shows up the moment the floor gets wet. A surface that grips when dry can go slippery underfoot, and that is exactly when a slip-and-fall claim starts. Safety Scrape is built for that moment. The cleated surface keeps traction in wet and oily conditions, and those same cleats scrape dirt and sand off shoes so loose grit does not track across the floor behind it.

Why Molded Nitrile, and Why This One

The mat is molded from solid nitrile rubber — a synthetic rubber that shrugs off oil, grease, and harsh chemicals instead of breaking down in them. That is why it holds up in kitchens and production areas where animal fats and cleaners would degrade a cheaper mat. The grip comes from cleats molded into the face, not a coating that wears off.

The traction is a tested rating, not just a textured look. Safety Scrape is certified high-traction by the National Floor Safety Institute, the independent body that rates slip resistance, and it posts a static coefficient of friction — a standard grip measurement — of 0.74 dry under ASTM C1028-96, which sits in the high-traction range. It also passes the DOC FF1-70 surface-flammability standard.

Where It Belongs, and Where It Doesn't

Safety Scrape fits anywhere wet or oily footing meets incoming dirt: commercial kitchens, food-prep and processing areas, locker rooms, industrial workshops, and exterior building entrances in wet climates. It reads as utility-first, so it is at home behind the counter, at a service entry, or on an inclined walkway where safe footing matters more than polish. It is one of the exterior scraper and traction mats we carry, chosen for the wet-and-greasy end of that range.

What it is not is a lobby showpiece. The molded surface is functional, not decorative, so for a customer-facing main entrance where presentation leads, a finished entrance mat usually carries the look better. Use Safety Scrape where the real job is footing and scraping — indoors or out.

Three Things to Check Before You Spec It

First, match the surface to the conditions. If the floor sees standing water, grease, or chemical splash, the nitrile build and cleated grip are the whole point — that is where Safety Scrape outperforms a smooth or fabric mat. In a dry, low-risk spot, a lighter mat may be enough.

Second, size it to the traffic path, not the doorway. Grit needs several footsteps on the mat to come off, and ISSA field data shows roughly 12 times more dirt enters a building during wet weather — which is also when footing is least stable. A mat too short for the path lets shoes skip both the cleats and the grip surface.

Third, plan placement and upkeep. A scraper works best paired with an absorbent mat just inside, so the scraper knocks off grit and the second stage takes the moisture. Lift and clear trapped grit underneath on a regular schedule, since debris packed beneath a mat is what shortens its life early.

Why Mats Inc.

We have specified entrance and safety matting since 1964, and we choose traction products by the test data, not the sales sheet. Safety Scrape earns its spot because its slip rating is independently certified and its nitrile build survives the kitchens and entrances that break down lesser mats. Tell us the conditions and the traffic path, and we will confirm it is the right call for your floor.

Frequently Asked Questions

What is Safety Scrape made of, and how slip-resistant is it really?

Answered by Dustin Thompson, Owner & CEO

Safety Scrape is molded from solid nitrile rubber, with the grip cleats built into the face rather than coated on top, so the traction does not wear away. The slip resistance is a tested rating: it is certified high-traction by the National Floor Safety Institute and posts a 0.74 dry static coefficient of friction under ASTM C1028-96, which sits in the high-traction range. It also passes the DOC FF1-70 surface-flammability standard. The cleats hold footing in wet and oily conditions — exactly where smooth mats turn slick.

How do I clean it, and how long should it last?

Answered by Dustin Thompson, Owner & CEO

Cleaning is about as simple as commercial matting gets. Shake off the loose grit, then hose or pressure-wash it; for a deeper clean, scrub with a deck brush and a neutral-pH detergent and hang it to dry before putting it back. It is safe in a commercial dishwasher and can be sterilized in an autoclave where that is required. At a commercial placement, plan on several years of service. The habit that extends it is lifting the mat regularly to clear grit trapped underneath, since packed debris is what wears a mat out early.

Can I use it both indoors and outdoors, and will it stay in place?

Answered by Dustin Thompson, Owner & CEO

Yes — it is built for both. Indoors it suits wet zones like kitchens, food-prep areas, and locker rooms; outdoors it works as an exterior scraper at building entrances, especially in wet climates. The mat is lightweight and flexible, which makes it easy to lift and clean, so on a smooth floor in a busy path it is worth checking that it sits flat and is not shifting. The best results come from placing it right where the wet meets the foot traffic, not off to the side of the path.

What sizes does it come in, and how do I pick the right one?

Answered by Jinna Hopson, Vice President of Marketing

Safety Scrape comes in a set of standard sizes, from a compact 2-by-3-foot mat up to a 3-by-10-foot runner, with a few widths in between. The size that matters is the one matched to the actual traffic path — people need several steps on the mat for the cleats to do their work, so a mat chosen to look tidy rather than to cover where feet land lets shoes miss the grip surface entirely. Tell us the doorway width and how far the path runs, and we will point you to the size that fits.

Will it look out of place at a customer-facing entrance?

Answered by Jinna Hopson, Vice President of Marketing

Its look is functional first. The molded grip surface reads as purpose-built — clean and intentional, but utilitarian rather than decorative. That suits service entries, back-of-house doors, and wet work zones perfectly. For a main lobby or a storefront where the entrance is part of the first impression, a more finished mat usually carries the look better. The simplest approach is to let the role decide: where safe footing is the real job, Safety Scrape looks exactly as serious as it is.

Does it come in different colors, or can I add a logo?

Answered by Jinna Hopson, Vice President of Marketing

Safety Scrape is a single functional construction — a molded black grip surface — so it is not a color or logo product. The trade-off is deliberate: every part of the design works toward traction and scraping, not appearance. If you want a brand or a custom color at the door, that belongs on a logo or carpet-inlay construction built for print, which we can point you to. Where the priority is footing and dirt control, the standard surface is the right tool.

By Dustin Thompson, Owner & CEO, Mats Inc.