$134.00
Have a question? We're here to help!
Description
4x6 Premium Stall Mats are the workhorse standard for working barns — a 4-foot-by-6-foot sheet of dense rubber that protects the stall floor underneath and gives a horse a stable, durable surface on top. The 5/8-inch diamond-plate construction insulates against cold and damp and puts a solid barrier between hooves and the subfloor. It's the stall matting most barns start with, and the one most stick with.
At 5/8 inch thick, these rubber stall mats carry the weight of a standing horse without flexing or shifting, and they lie flat instead of curling at the corners the way thinner mats do. The diamond-plate surface adds grip and hides wear. Subfloor protection is the other half of the job — the mat keeps urine and moisture off the concrete or packed base underneath. Penn State Extension flags subfloor protection and a stable base as the factors most tied to flooring lifespan.
In the barn, these are the right pick for standard working stalls, aisles, and grooming areas — anywhere durability and subfloor protection are the main jobs and horses are turned out enough that cushioned mats aren't necessary. The same density that makes them work in a stall makes them the go-to for home and garage gyms, where they protect the slab and quiet dropped weights. TheHorse.com stable-management guidance reinforces that a sound mat-and-subfloor system, not the mat alone, controls odor and wear.
The 4'x6' size covers a standard 12'x12' stall with six mats and tiles easily into gym layouts. Within the stall mats for horses range it's the standard rubber tier, below the cushioned and drainage constructions. Installed over a level, prepared base and cleaned on a normal routine, dense rubber stall mats like these last well over a decade — the failure modes are an uneven subfloor, trapped moisture, or going too thin, none of which apply to a properly installed 5/8-inch mat.
Frequently Asked Questions
Is 5/8 inch thick enough for a horse stall?
Answered by Dustin Thompson, Owner & CEO
Yes — 5/8 inch is the standard working-stall thickness because it carries a standing horse's weight without flexing, lies flat instead of curling, and puts a real barrier between hooves and the subfloor. Thinner mats shift, curl at the corners, and wear through faster under hoof traffic. You only step up from 5/8-inch standard rubber when the horse needs cushioning for extended standing — foaling, rehab, geriatric — which is a different construction, not just more thickness.
How long will these last, and what makes them fail early?
Answered by Dustin Thompson, Owner & CEO
Installed right, dense 5/8-inch rubber stall mats last well over a decade. What shortens that is almost never the mat — it's the base. An uneven or soft subfloor lets the mat shift and wear unevenly; trapped moisture underneath breaks the mat and the subfloor down together. A level, prepared base of compacted stone or smooth concrete, with the floor cleaned and the mats lifted periodically, is what gets the full service life.
Can I use these as gym or garage flooring, not just in a stall?
Answered by Jinna Hopson, Vice President of Marketing
Absolutely — the same 4x6 mats are one of the most popular home-gym and garage-gym floors there is. The dense rubber protects a concrete slab, absorbs the shock of dropped weights, and quiets the noise, and the 4'x6' size tiles across a gym floor with minimal cutting. It's the same mat doing the same job — heavy, durable, floor-protecting — whether it's under a horse or a squat rack.
How many mats do I need, and can they be cut to fit?
Answered by Jinna Hopson, Vice President of Marketing
A standard 12'x12' stall takes six 4'x6' mats with little to no trimming, and gym or garage spaces tile out the same way. For non-standard stalls or rooms, the mats can be trimmed to fit around walls, posts, and equipment. Send the floor dimensions — stall or gym — and we'll work out the mat count and any cuts before you order so there's minimal fitting on site.
By Dustin Thompson, Owner & CEO, Mats Inc.
Ordering Info
* Dimensions: 4′ x 6′ x 5/8″
* Bottom profile: Smooth (flat) or studs
* Weight: 91.5 lbs
Call: 1-800-234-1492
Email: mats@thematsinc.com
Reviews
Write Your Own Review
Related Products
#775 Epoxy Flooring Adhesive
#560 Rubber Flooring Adhesive
#110 Epoxy Nose Caulk
#300 Water Based Contact Adhesive
#400 Neoprene Contact Adhesive
Rotary Table & Rig Floor Mats
Fore-Runner Mat
Safety Track Resilient Medium Non-Skid Tape
3M Vinyl Loop Wet Area Matting
Protect Vinyl Matting