Comfort Scrape Anti Fatigue Mats

What Comfort Scrape Does Before Grit and Grease Leave the Station

Comfort Scrape is two mats doing one job: a scraper mat and an anti-fatigue mat in a single bi-level design. The raised standing surface cushions long shifts over a hard floor, while the lower level traps dirt, debris, and drips beneath shoe level — so what lands at the station stays at the station.

Without it, the messiest spot on the floor travels. Grit and grease ride out on shoe soles, spreading a slip hazard down every walkway and grinding into flooring far from where the work happens. Meanwhile the person standing in that spot all shift absorbs the hard floor through their feet, knees, and back. One mat can interrupt both problems.

Why a Bi-Level Scraper Over Nitrile, and Why This One

The bi-level construction is the heart of it. Shoes ride on the upper surface while the recessed wells below collect what falls — dirt, metal shavings, food debris, drips — holding it out of the standing path and off the soles that would otherwise track it through the building.

The material is built for the environments that need scraping most. High-density, closed-cell nitrile rubber foam gives the cushion its anti-fatigue quality and shrugs off the mess: grease and oil proof, chemical resistant, and welding safe. A lifetime anti-microbial treatment protects the mat itself against odors and degradation between cleanings.

Safety is certified rather than assumed — the surface is certified high-traction by the National Floor Safety Institute, and beveled edges give feet and cart wheels a safe transition from floor to mat. When the wells fill up, the lightweight, flexible design lifts easily, and the mat can be commercially laundered to strip out oil, grease, and soil completely.

Where It Belongs, and What It Is Not

Comfort Scrape belongs at working stations where grease, oil, or chemicals meet foot traffic: prep and dish areas, machine and fabrication stations, parts-washing benches, and packing posts where debris gathers underfoot. It earns a special place at the boundary between a messy zone and the rest of the floor — the last stop before shoes carry the mess onward.

What it is not: an entrance doormat, and not a flow-through drainage mat. This design contains what falls rather than draining it through, so wash-down zones with steady standing water are better matched to the drainage-style options in our anti-fatigue mats and runners lineup. Comfort Scrape is for the station where debris, not water volume, is the daily enemy.

Three Things to Check Before You Spec It

First, look at what actually ends up underfoot. If the station generates grit, shavings, food debris, or greasy drips, the bi-level wells earn their place by capturing it. If the real problem is water by the gallon, a flow-through drainage mat is the honest answer — trapping isn't the same job as draining.

Second, plan the emptying and cleaning rhythm before the mat arrives. The wells do their job by filling, so build a routine around lifting the mat, clearing what it caught, and giving it a real wash — it's launderable, so oil, grease, and ground-in soil come all the way out rather than accumulating for good.

Third, place it across the step-off path. The scraping only helps if shoes cross the mat before leaving the zone, so position it where people actually pivot and exit — with the beveled edges facing the traffic so every transition on and off stays a safe one.

Why Mats Inc.

Tracked grit is one of the quietest problems we've watched wear down facilities since 1964 — it dulls floors, spreads slip hazards, and doubles the housekeeping load one shoe sole at a time. We carry this mat because it stops that at the source, we verify every claim on this page against published product data, and we back it with a 1-year limited Mats Inc. warranty.

Frequently Asked Questions

How does the bi-level design actually work?

Answered by Dustin Thompson, Owner & CEO

Think of it as a standing deck over a catch basin. Shoes stay on the raised upper surface, and everything that falls — grit, shavings, food debris, greasy drips — settles into the recessed wells below, out of the standing path. That's what prevents tracking: the mess never sits where soles can pick it up. The cushion underneath is high-density, closed-cell nitrile rubber foam, so the mat is doing genuine anti-fatigue work the entire time it's scraping.

Will grease, chemicals, or welding work wear it out?

Answered by Dustin Thompson, Owner & CEO

This construction is specified for exactly those exposures: the nitrile rubber is grease and oil proof, chemical resistant, and welding safe, and the closed-cell foam resists soaking up what the shift drops on it. A lifetime anti-microbial treatment protects the mat against odors and material breakdown between cleanings. The practical habit that keeps any grease-rated mat at its best is not letting buildup sit indefinitely — and since this one launders, a real reset is always available.

Is it safe where people move quickly on and off it?

Answered by Dustin Thompson, Owner & CEO

Yes — the surface is certified high-traction by the National Floor Safety Institute, independent testing rather than a marketing claim, and the beveled edges slope to the floor so a hurried step doesn't catch a raised lip. Placement does the rest: set the mat so the natural pivot-and-exit path crosses it fully, keeping fast feet on the certified surface instead of on a greasy strip of bare floor beside it.

Isn't a scraper mat something for the front door?

Answered by Jinna Hopson, Vice President of Marketing

That's the natural instinct — most of us picture scraping happening at an entrance. This one scrapes where the mess is made instead. A dish station, a machine post, or a prep line generates its own debris all day, and an entrance mat forty feet away does nothing about it. Comfort Scrape puts the capture right at the source, while cushioning the person standing there — a combination an entrance mat was never designed to offer.

Will it really keep the floors around the station cleaner?

Answered by Jinna Hopson, Vice President of Marketing

That's the change facilities notice first. When debris drops into the wells instead of lying in the standing path, it stops riding out on shoe soles — so the hallway past the kitchen stays presentable, the showroom floor beside the shop keeps its finish, and housekeeping stops chasing the same trail of grit every day. The mat quietly shrinks the messy zone down to its own footprint, and the rest of the building shows it.

How much of the station should it cover?

Answered by Jinna Hopson, Vice President of Marketing

Cover the standing zone and the step-off path together. Watch the station during a real shift: where feet plant for the work, and which direction people leave. The mat should span both, because a mat that ends one stride short of the exit path lets shoes step from debris straight onto clean floor. Size to the work zone with margin on the exit side, and our team can help match available sizes to the station's footprint.

By Dustin Thompson, Owner & CEO, Mats Inc.