| Manufacturer | LRP Rubber |
|---|
Posted on
The Horse Stall Mattress is a solid rubber stall mattress for horses that spend long hours standing or lying down. It is one piece of vulcanized rubber, 1-1/4" thick, with a coned underside that gives under weight and springs back. There is no foam core and nothing inside to soak up urine. That makes it the comfort pick for stalls where rest matters most.
A horse on stall rest, a mare close to foaling, or an older horse with stiff joints can spend most of the day on one patch of floor. Bare concrete or a thin mat gives almost nothing back. Every hour of standing and every time the horse lies down or gets up puts that load straight into legs and joints.
Joint impact is one of the main things that sets good stall flooring apart over time, a point Penn State Extension makes in its review of stable flooring. A stall mattress is built to soften that impact. A standard mat is built mainly to protect the floor.
The cushion comes from the shape of the rubber, not from a soft layer inside it. The underside is covered in rubber cones. When a horse stands or lies on the mattress, the cones flex and trap air beneath the mat, which creates a soft but resilient air-cushion effect. When the weight comes off, they return to shape.
Because the mattress is a single piece of vulcanized rubber, there are no layers to separate and no core for moisture to reach. Urine stays on the surface, where bedding and cleaning can deal with it. Each 48" x 72" mattress weighs about 124 lb.
An exterior frame runs around the edge of the underside and seals the base of the mattress. That keeps dirt and bedding from working in under the mat, where they would build up out of sight. The top has a pebble texture that is non-slip but not abrasive on hides or hocks when a horse lies down.
This mattress earns its place in foaling stalls, rehab and stall-rest stalls, stalls for older horses with sore joints, and stalls for performance horses that rest between work. These are the horses that spend the most hours on the floor, so that is where the cushioning matters most.
It is not a replacement for bedding, and it is not the right call for every stall. A horse turned out most of the day is usually well served by a standard rubber mat from our stall mats for horses range. The mattress is the comfort step up, for the stalls where horses truly live.
First, check the base. The mattress is made to go on concrete, in new barns or in retrofits of existing stalls. The concrete should be level and sound. Low spots and high spots show through as uneven wear, and standing water under any mat is a problem waiting to happen.
Second, size it to the stall. A single mattress is 48" x 72". Full-stall kits come in 10' x 10', 12' x 12', and 12' x 16', and custom sizes are available. Measure wall to wall, and note doors, corners, and posts before you order.
Third, decide on the layout. The mattresses can be laid side by side as single pieces, or ordered with interlocking edges that join them together. Interlocking edges connect the pieces so the stall floor works as one surface instead of separate mats.
Mats Inc. has been in the matting business since 1964, and we know where a mattress makes sense and where a standard mat does the job. Send us the stall measurements and the horse that will live there, and we will help you size a single mattress or a full-stall kit to fit.
| Construction | Single-piece vulcanized rubber (no foam core) |
| Thickness | 1-1/4" (32 mm) |
| Single Mattress Size | 48" x 72" (4' x 6') |
| Weight | 124 lb (56 kg) per mattress |
| Top Surface | Pebble texture, non-slip, non-abrasive |
| Underside | Coned for an air-cushion effect; exterior frame seals the base |
| Layout | Laid side by side, or with interlocking edges |
| Full-Stall Kits | 10' x 10', 12' x 12', 12' x 16' (custom sizes available) |
| Base | Concrete, new builds or retrofits |
| Warranty | 1-year limited (Mats Inc.) |
Answered by Dustin Thompson, Owner & CEO
No. The mattress is one solid piece of vulcanized rubber, 1-1/4" thick, with no foam and no separate top cover. The cushion comes from rubber cones on the underside that flex under weight and create an air-cushion effect.
Because there is no core, there is nothing inside for urine or moisture to soak into. An exterior frame around the underside seals the base so dirt does not build up beneath it.
Answered by Dustin Thompson, Owner & CEO
The cushioning is shaped into the rubber itself, so there is no foam layer to pack down. The cones flex under the horse and return to shape when the weight comes off.
What shortens the life of any stall floor is usually the base. An uneven slab concentrates wear on the high spots. Set the mattresses on level, sound concrete and keep the stall clean, and they hold up well.
Answered by Dustin Thompson, Owner & CEO
The mattresses go down on a level concrete base, in a new barn or a retrofit. Lay them side by side as single pieces, or order them with interlocking edges that simply connect together.
For cleaning, use a non-metal scraper, a stiff-bristled broom, a vacuum, a hose at medium pressure, or a steam cleaner. Avoid metal scrapers.
Answered by Jinna Hopson, Vice President of Marketing
No. The mattress gives the horse a softer place to stand and lie down, but it does not do the job of bedding.
The solid rubber top does not absorb urine, so you still want a light layer of bedding to soak it up and keep the stall dry.
Answered by Jinna Hopson, Vice President of Marketing
They serve a similar purpose. Both give the horse a softer place to stand and lie down. But a mattress does not replace bedding.
The solid rubber top does not absorb urine, so you still want a light layer of bedding to soak it up and keep the stall dry.
Answered by Jinna Hopson, Vice President of Marketing
Single 48" x 72" mattresses work well for small areas, or for adding a cushioned zone to one part of a stall. Full-stall kits cover the whole floor in 10' x 10', 12' x 12', or 12' x 16' stalls.
If your stall is a different size, custom sizes are available. Measure wall to wall and send us the numbers, along with any doors or posts, and we will help you plan the layout.
By Dustin Thompson, Owner & CEO, Mats Inc.
Posted on