All Floor Mats
Floor mats can elevate your commercial or industrial space in many ways. They can protect employees and visitors from slips, trips, and falls while also safeguarding your flooring. These fixtures can also reduce noise levels in the workplace, create a more comfortable atmosphere, and make it easier to clean up spills quickly.
If you want to reap the benefits floor mats provide, shop at Mats Inc. today. Mats Inc. provides a large array of customizable floor mats for use in facilities such as banks, hotels, insurance companies, and other oriented establishments.
You can view all our floor mats here. Our mat selection includes exterior & interior floor mats as well as stair treads & risers. We also have Specialty Mats, Eco-Friendly Mats and Mat Accessories. All our floor mats come with an array of customization options so that you can choose the best fit for your space. Shop now, or contact us for more information about the products we offer.
-
#775 Epoxy Flooring Adhesive
- A two part epoxy adhesive for installation of Disc-O-Tile and Disc-O-Tread.
- It is the only recommended adhesive for below grade flooring installation.
- Each unit contains a Part "A" and Part "B" packed in one gallon cans to be mixed to produce one gallon of adhesive.
- One unit will cover approximately 150 square feet.
- Environmentally friendly.
- Available in one gallon kit.
-
#560 Rubber Flooring Adhesive
- A latex adhesive for installation of rubber flooring or tiles over suspended wood or suspended concrete floors and over suitable on grade concrete floors.
- May be used with rubber stair treads.
- Where excessive moisture exist, installation is not recommended.
- Environmentally friendly.
- Covers approximately 150 square feet per gallon, single coat.
- Available in gallon can or 4 gallon pail.
-
#110 Epoxy Nose Caulk
- Epoxy nose caulk should be used on all stair treads installations.
- It is necessary when Adjusta-Nose treads are being installed or when the step nosing is worn, broken or rounded.
- This two part epoxy will fill voids at the nose and give needed support underneath the stair tread nosing.
- Can also be used to repair surface of step.
- Available in quart units.
-
#300 Water Based Contact Adhesive
- A water based contact adhesive for bonding rubber and vinyl stair treads and risers to concrete, wood, terrazzo, metal or marble.
- Brush on both surfaces
- Installs approximately 75 feet of treads per gallon.
- Available in quart or gallon cans.
-
#400 Neoprene Contact Adhesive
- Rapid drying, solvent based contact adhesive.
- Formulated for bonding rubber and vinyl treads to concrete, terrazzo, metal, marble or wood.
- Brush both surfaces, installs approximately 75 lineal feet of treads per gallon.
- Contains solvent, highly flammable.
- Available in quarts or gallon cans.
-
Diamond Design Rubber Stair Treads
- The original diamond design molded rubber stair tread, half diamond design, half smooth, with a longer adjustable nose.
- Designed to fit pan filled, molded concrete, or terrazzo steps.
- For use in commercial, industrial or institutional buildings.
- Diamond design surface is 6" deep, covers the impact area of pedestrian traffic.
- Meets Fed. Spec. RR-T-650E and ZZ-T-001237 (GSA-FSS)
- Full 1/4" thickness at the nose,12 1/4" depth and a 1 1/4" deep inside nose.
- Contains no asbestos fiber and the color extends throughout the thickness of the tread.
- Available in either square or curved nose.
- Curved nose available in Series I colors only.
- Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
- Strips are available in black, beige, brown, gray, red or yellow.
-
Diamond Design Rubber Tile
- Diamond design tile is ideal for stair landings, lobbies, aisles, ramps, elevators or entryways.
- Diamond design pattern matches diamond design stair treads.
- For use in commercial, industrial or institutional buildings.
- 7/32" thick, 24" x 24" factory cut tile.
- Contains no asbestos fiber and the color extends throughout the thickness of the tread.
- Select standard color from Series I, II, or III.
- Diamond design tile is ideal for stair landings, lobbies, aisles, ramps, elevators or entryways.
-
Lo-Disc Design Rubber Tile
- LO-DISC design tile matches #0501-800 LO-DISC treads for use on landings.
- 3/4" diameter disc, raised .025" for easier cleaning and gives a safer surface for pedestrian traffic than smooth tiles.
- Meets Fed. Specs. SS-T-312B.
- 1/8" thick, 24" x 24" factory cut tile.
- Contains no asbestos fiber and the color extends throughout the thickness of the tread.
- Select standard color from Series I, II, or III.
-
Lo-Disc Design Rubber Stair Treads
- Our LO-DISC tread has the popular round disc design, but in a lighter gauge stair tread.
- Treads have tapered 3/4" disc, raised .025".
- Excellent for lighter traffic stairways.
- Meets Fed. Spec. RR-T-650E and ZZ-T-001237 (GSA-FSS)
- Flame spread rating of 75 or less using ASTM-E-84 test.
- Full 3/16" thickness at the nose, 12 1/4" depth and a 1 1/2" deep inside nose.
- Contains no asbestos fiber and the color extends throughout the thickness of the tread.
- Available in square nose only.
- Select standard color from Color Series I, II, or III.
- Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
- Strips are available in black, beige, brown, gray, red or yellow.
-
Rubber Cove Stair Risers
- Same colors as our rubber stair treads.
- Easy to trim in height and length.
- Risers are the same length as the stair treads.
- 1/8" thick, 7" high with a 5/8" toe.
-
Disc-O-Tile Rubber Tile
- Unique floor tile with raised circular disc, 3/4" diameter, for better traction.
- Circular pattern matches DISCO-O-TREAD stair treads.
- Factory cut 24" x 24" square tiles for fewer joints and quicker installation.
- For use in commercial, industrial or institutional buildings.
- 3/16" thick.
- Contains no asbestos fiber and the color extends throughout the thickness of the tread.
- Flame spread rating of 25 or less using ASTM-E-84 test.
- Select standard color from Series III.
- Unique floor tile with raised circular disc, 3/4" diameter, for better traction.
-
Heavy Duty Vinyl Stair Treads
- Heavy gauge sharp-rib design koroseal vinyl tread for your heaviest traffic.
- 1/4" thick at the wear area.
- Meets Fed. Spec. RR-T-650E Type B.
- 1/4" thick, 12" deep.
- Contains no asbestos fiber, made of first quality vinyl color throughout.
- Square nose only.
- Heavy gauge sharp-rib design koroseal vinyl tread for your heaviest traffic.
Products
Floor mats can elevate your commercial or industrial space in many ways. They can protect employees and visitors from slips, trips, and falls while also safeguarding your flooring. These fixtures can also reduce noise levels in the workplace, create a more comfortable atmosphere, and make it easier to clean up spills quickly.
If you want to reap the benefits floor mats provide, shop at Mats Inc. today. Mats Inc. provides a large array of customizable floor mats for use in facilities such as banks, hotels, insurance companies, and other oriented establishments.
You can view all our floor mats here. Our mat selection includes exterior & interior floor mats as well as stair treads & risers. We also have Specialty Mats, Eco-Friendly Mats and Mat Accessories. All our floor mats come with an array of customization options so that you can choose the best fit for your space. Shop now, or contact us for more information about the products we offer.