Mats & Products Markets
-
Rely-On Olefin Matting
- Hard wearing 100% continuous filament Olefin pile takes heavy traffic without fuzzing or pilling.
- Colorfast, even in direct sunlight.
- Traps one gallon of water per square yard.
- Easy to clean - just vacuum or hose.
- Backed with solid vinyl for even greater protection.
-
Fore-Runner Mat
- This premium outdoor scraper mat removes heavy dirt and debris from bottoms before it reaches your front door.
- This mat features 19 ounces per square yard of ribbon polypropylene which provides vigorous scraping action, removing dirt from shoe bottoms and holding it beneath the surface of the mat.
- The durable, loop-twist construction performs under the harshest of conditions.
- Our vibrant colors retain luster even after years of heavy use.
- An 80 mil durable, solid vinyl backing reduces mat movement.
- Overall thickness, 5/16".
- Custom sizes available.
-
Safety Scrape Rubber Mats
- Heavy durable Safety Scrape mats work wonders in environments where traction is essential.
- In kitchens, locker rooms, on inclines, behind lunch counters and bars, in production areas and outside entrances.
- Constructed of 100% nitrile rubber for oil and chemical resistance.
- 20% post-consumer recycled rubber content.
- Molded face cleats act as scrapers to remove heavy dirt and soil from shoes and provide an excellent anti-skid surface.
- Molded anti-skid gripper backing.
- Available in four OSHA approved striped color border.
- 1/8" thick.
-
Safety Track Non-Skid Tape - Coarse
- This material fits your specific needs, in assorted shapes and sizes.
- Assists in preventing costly slip and fall accidents and helps in complying with strict OSHA safety standards.
- This material can be used indoors or out, wet or dry, even around oil and grease.
- It goes on like tape to a clean, dry surface and is ready for immediate service.
-
Smooth Marbleized Vinyl Switchboard Matting (Mil Spec)
- A smooth surface, high voltage insulating vinyl floor covering designed to protect personnel from accidental exposure to electrical potentials not exceeding 3000 volts.
- Conforms to MIL-DTL-15562G (FORMALLY MIL-M-15562F), TYPE I.
- Dielectric Test Voltage -30,000 VAC.
- Proof Tested Over Entire Surface at -15,000 VAC.
- Recommended Maximum Use Voltage -3,000 VAC.
- Marbelized colors.
-
WP-70 Non-Skid Epoxy Coating
- Trowel on, 2 part epoxy system for extreme, durable, long lasting solution.
- For industries, such as breweries, canneries, or off-shore drilling platforms.
- Extra thick consistency requires trowel and squeegee application.
- Packed 1 gallon kit per case.
- 25 - 30 square feet coverage per gallon.
- No flash or volatile solvents, low voc.
- 18 - 24 hour cure time.
- 30 - 60 minute pot life once mixed.
- Squeegee and mixing blade not included.
-
Oil Trap Absorbent Mat Pads with Tray
- Oil trap absorbant mat pads and tray combine absorption with mid-range abrasion resistance to trap grime from boots and wheel trucks.
- 100% recycled post-consumer fibers soak up oils, coolants, solvents, and water.
- Abrasion-resistant qualities make it ideal for areas with moderate foot traffic.
- Excellant for walkways into offices and other finished areas.
- Includes reusalbe nitrile rubber tray and 12 disposable pads.
-
Dri-Dek Interlocking Tiles
Starting at $10.45
- 12" x 12" interlocking modular tiles for those areas where safety and comfort are critical.
- Open design allows water and debris to fall through the tile and out the drain.
- Tiles snap quickly together and can be easily trimmed to fit wall to wall applications.
- Perfect for showers, saunas, locker rooms, or any work station.
- Contains Oxy-B1 vinyl to inhibit growth of mold, mildew, and bacteria.
-
Wide Rib Vinyl Matting
- Same popular design as our standard corrugated rubber matting, but at a very economical price.
- Quiets noise, saves floors in wet or dry weather.
- Most widely used where floor protection and safety are vitally important.
- Easy to clean.
-
Safety Step Rubber Mats
Starting at $101.00
- Low cost, high value mat for any industrial application.
- Anti-fatigue mat withstands wet environments.
- Modular design allows for custom installation.
- Beveled edges and corners are available.
- Molded in connectors on two adjoining sides.
- Mats are available with holes for drainage application.
- 1/2" thick
-
Grit Top Cushion Tile
- For maximum traction, use our grit top tile.
- The carbide grit provides maximum traction in areas where oil, water, solvents or chemicals are found.
- Made from 100% recycled PVC.
- Bevel edges and corner pieces are available in black or safety yellow.
- Bevel edges and corners are not grit coated.
- 3/4" thick.
- Same waffle grid design as our standard cushion tiles, #0616.
- See #0616 for drainage version or #0616S for solid version.
-
Heronair Vinyl Matting
- Superior slip resistance, anti-fatigue properties and lower cost makes this the mat of choice where duckboard is not necessary.
- The hollow ribs provide comfort underfoot.
- Provides excellent comfort & insulation where cold, hard floors are otherwise an issue.
- 1/4" thick.
- Sold in 40' rolls only.