Brands/Manufacturers
Mats, Inc. provides a large array of mats & matting products that can be customized and used in facilities such as banks, hotels, insurance companies and other oriented establishments.
-
Matlock Non-Skid Backing
- Slip resistant backing to help prevent a mat from moving on hard surfaces such as wood, ceramic tile, marble, linoleum, etc.
- Available on most vinyl backed carpet mats.
- Ask customer service for more information.
-
Rug-Hugger Non-Skid Backing
- Anti-slip backing designed for mats used on top of cut pile carpeting.
- Available on most vinyl backed mats.
- Ask customer service for more information.
-
Safety Scrape Rubber Mats
- Heavy durable Safety Scrape mats work wonders in environments where traction is essential.
- In kitchens, locker rooms, on inclines, behind lunch counters and bars, in production areas and outside entrances.
- Constructed of 100% nitrile rubber for oil and chemical resistance.
- 20% post-consumer recycled rubber content.
- Molded face cleats act as scrapers to remove heavy dirt and soil from shoes and provide an excellent anti-skid surface.
- Molded anti-skid gripper backing.
- Available in four OSHA approved striped color border.
- 1/8" thick.
-
Comfort Scrape Anti Fatigue Mats
- Constructed of 100% high density closed cell nitrile rubber.
- Far superior in grease and oil resistance than other "grease proof" mats.
- Excellent anti-fatigue properties for added employee comfort.
- Low profile and slip-resistant surface reduces slip and fall accidents.
- Non-skid backing keeps mat in place.
- Anti-microbial Treated - guards against degradation from micro-organisms and minimizes mats being a source of odors.
- Available with or without holes.
- Beveled edges for safe access.
- Welding safe.
- Certified slip-resistant by the National Floor Safety Institute.
- See item #420 for mat option with holes.
-
Outdoor Recycled Rubber Stair Tread
- Outdoor Recycled Rubber Stair Tread is an excellent tread for exterior applications.
- Made from 100% recycled tires.
- Diamond design surface is 9" deep with a 3" smooth back border.
- Full 1/4" thickness at the nose, 12 1/4" depth and a 1 1/4" deep inside nose.
- Available in square nose only.
-
Vinyl Cove Stair Risers
- Solid color cove risers match our vinyl stair treads.
- Easy to trim in height and length.
- Risers are the same length as the stair treads.
- 1/8" thick, 7" high with a 5/8" toe.
- Ribbed back for better adhesion.
- Available in Black, Brown, Gray, or Sand.
-
Medium Duty Vinyl Stair Treads
- Medium duty stair tread.
- This tread was designed for use in apartment projects and light commercial applications.
- Lower initial cost, ease of installation, ease of cleaning and long service appeals to apartment owners and builders.
- Extra thick at the front, Meets Fed. Spec. RR-T-650E Type B.
- 3/16" thick, 12" deep, 1 1/4" square or curved nose.
- Contains no asbestos fiber, made of first quality homogeneous vinyl, color throughout.
- Specify either square or curved nose.
-
Light Duty Vinyl Stair Treads
- Light duty stairwell tread.
- Lower initial cost tread designed for multi-family dwellings, apartment houses and light residential applications.
- Flat rib surface is easy to clean.
- Meets Fed. Spec. RR-T-650E Type B.
- 1/8" thick, 12" deep, 1 3/4" long square nose.
- Contains no asbestos fiber, made of first quality homogeneous vinyl, color throughout.
- Square nose only
-
Disc-O Tread Rubber Stair Treads
- New design Adjusta-Nose tread easily adjust to steps with angle between 90o and 60o.
- Ideal for public buildings where fire safety is a prime concern.
- For use in commercial, industrial or institutional buildings.
- Circular disc, 3/4" diameter, are easy to clean and affords for safer pedestrian traffic.
- Meets Fed. Spec. RR-T-650E.
- Flame spread rating of 25 or less using ASTM-E-84 test.
- Full 1/4" thickness at the nose, 12 1/2" depth and a 1 7/8" deep inside nose, smooth rear border is 3" deep.
- Contains no asbestos fiber and the color extends throughout the thickness of the tread.
- Available in standard solid color from Color Series III only.
- Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
- Strips are available in black, beige, brown, gray, red or yellow.
-
Heavy Duty Vinyl Stair Treads
- Heavy gauge sharp-rib design koroseal vinyl tread for your heaviest traffic.
- 1/4" thick at the wear area.
- Meets Fed. Spec. RR-T-650E Type B.
- 1/4" thick, 12" deep.
- Contains no asbestos fiber, made of first quality vinyl color throughout.
- Square nose only.
- Heavy gauge sharp-rib design koroseal vinyl tread for your heaviest traffic.
-
Disc-O-Tile Rubber Tile
- Unique floor tile with raised circular disc, 3/4" diameter, for better traction.
- Circular pattern matches DISCO-O-TREAD stair treads.
- Factory cut 24" x 24" square tiles for fewer joints and quicker installation.
- For use in commercial, industrial or institutional buildings.
- 3/16" thick.
- Contains no asbestos fiber and the color extends throughout the thickness of the tread.
- Flame spread rating of 25 or less using ASTM-E-84 test.
- Select standard color from Series III.
- Unique floor tile with raised circular disc, 3/4" diameter, for better traction.
-
Rubber Cove Stair Risers
- Same colors as our rubber stair treads.
- Easy to trim in height and length.
- Risers are the same length as the stair treads.
- 1/8" thick, 7" high with a 5/8" toe.
Manufacturer
Mats, Inc. provides a large array of mats & matting products that can be customized and used in facilities such as banks, hotels, insurance companies and other oriented establishments.