• Conforms to ANSI/ASTM D178, TYPE II, CLASS 2.
• Conforms to TABLE 3 for oil-resistance and flame-resistance.
• Dielectric strength 30,000 volts A.C.
• Proof tested at 20,000 volts A.C.
• Recommended maximum use voltage is 17,000 A.C.
• Diamond pattern.

• Conforms to ANSI/ASTM D178, TYPE II, CLASS 2.
• Conforms to TABLE 3 for oil-resistance and flame-resistance.
• Dielectric strength 30,000 volts A.C.
• Proof tested at 20,000 volts A.C.
• Recommended maximum use voltage is 17,000 A.C.
• Diamond pattern.
• Black with Yellow Safety border.
• Clearly marked with supplier name, ASTM D178, Type II, Class 2 on the back.

• Conforms to ANSI/ASTM D178, TYPE II, CLASS 2.
• Conforms to TABLE 3 for oil-resistance and flame-resistance.
• Dielectric strength 30,000 volts A.C.
• Proof tested at 20,000 volts A.C.
• Recommended maximum use voltage is 17,000 A.C.
• Corrugated pattern.
• Black with Yellow Safety border.
• Clearly marked with supplier name, ASTM D178, Type II, Class 2 on the back.

• Static dissipative surface resistivity of 10⁷ ohms per square.
• Used at computer work stations, cash stations and test/electronic stations.
• Stock mats include one installed ground cord.
• Custom mats require one ground cord per every 10' of mat.
• Extra cords sold separately: Grounding Cord
• Beveled edges for additional safety.
• 1/2" thick
• Black color
• Custom lengths available

• Our new material is made of static dissipative, anti-fatigue sponge vinyl.
• The surface resistivity tests at 10-9 ohms per square foot.
• The pebble surface provides safe foot traction and yet is easy to clean.
• This is the mat for electronic assembly, test benches, test stations, or checkout counters.
• Grounding cord included with standard size mats.
• Custom mats require one grounding cord per every 10' of mat.
• Extra cords sold separately: Grounding Cord

• Same popular design as our standard corrugated rubber matting, but at a very economical price.
• Quiets noise, saves floors in wet or dry weather.
• Most widely used where floor protection and safety are vitally important.
• Easy to clean.

• This double thick matting combines toughness for long wear in heavy traffic areas.
• Resistant to oils, greases, and chemicals.
• Sharp, v-rib corrugations run lengthwise on this matting and are designed to help remove dirt and protect floors.

• Diamond plate is a uniquely engineered, deeply- embossed, steel design matting.
• It is recommended for heavy traffic areas where floor protection and safety are important.
• It exhibits exceptional wear characteristics and is ideal for heavy traffic.
• Also has good resistance to most beverages, normal oils, usual household cleaners and common industrial chemicals.

• Same design as our standard diamond plate matting, (#0205), but with the added feature of a highly visible 4-1/2" wide yellow border on both sides
• Diamond plate is a uniquely engineered, deeply- embossed, steel design matting.
• It is recommended for heavy traffic areas where floor protection and safety are important.
• It exhibits exceptional wear characteristics and is ideal for heavy traffic.
• Also has good resistance to most beverages, normal oils, usual household cleaners and common industrial chemicals.

• This vinyl matting is smooth on both sides.
• Great for protecting counter tops, work benches and tool boxes.
• This material is oil and water resistant and is not affected by most corrosive chemicals.

• Natural cocoa fibers woven into a herringbone design that is perfect as a hallway or staircase runner.
• Biodegradable natural fiber.
• 5/16" thick.
• Short ends of roll not bound.
• Sold in 150' full rolls only.

• The tough knobbed bar design of this matting adds safety and traction in all wet and dry applications.
• The rubber is compounded of 100% nitrile for grease resistance.
• This matting is ideal for food processing plants, kitchens, hospitals, laboratories and industrial plants.

• Flex Track Fine Grade has been engineered for foot friendly, non-slip protection in showers, baths and bathing areas.
  
• Excellent for exercise and gym equipment.
  
• Available in white and clear
  
• Sold in full cases only.
  

• Crystal clear mats that let the beauty of your fine carpeting or flooring be seen, but protected from dirt and marring.
• These mats are constructed of an acrylic sheet with smooth rounded edges.
• Available in 1/4" or 3/8" thickness.
• Custom cut to your specifications.
• Mats can not be shipped UPS.
• Acrylic mats carry no warranty.

• Made of extruded 6063 aluminum alloy and are fabricated to exact dimensions to insure fit to the mat.
• Frames are supplied with mitered corners and shipped unassembled with all necessary anchor keys and corner pins.
• Frames must be assembled at the job site and installed so that upper edge is level with finished floor surface.
• The frame should be anchored into cement with anchor keys a minimum of 24" on centers.
• Corner pins should be installed at all corners of frame.
• For use on mats of 3/8" - 5/8" thickness
• "Dimensions" are inside frame dimensions.

• Our renovation treads are manufactured of high quality, heavy duty extruded aluminum with our exclusive safety traction surface.
• 9" or 11" depth covers most applcations.
• 9/32" thick with 1 1/8" nose.
• 9" treads available up to 144' in one section and 11" treads available up to 96' in one section.
• Treads install easily over existing worn stairways of concrete, wood, steel or terrazzo.
• Available with optional sightline or glow in the dark front edge at an additional cost.
• Holes are drilled and countersunk unless otherwise specified.

• Mineral coated anti-slip material with foil backing that conforms around corners and to irregular surfaces.
• Used on diamond tread safety plates, steps, ladders, ramps, equipment, vehicles and other irregular surfaces to create a non-slip surface.
  
• Black color.
• Sold in full cases only.

• Our anchor mat sits still, even if you don't.
• Mat has hundreds of rigid anchors that hold the mat in place.
• The textured surface facilitates easy but controlled movement of caster chairs.
• The vinyl material is scuff-resistant and is transparent to let the beauty of your carpet show through.
• Available in 3/16" and 1/4" thickness.
• 3/16" material is available in rolls up to 50' in length.

• Outdoor Recycled Rubber Stair Tread is an excellent tread for exterior applications.
• Made from 100% recycled tires.
• Diamond design surface is 9" deep with a 3" smooth back border.
• Full 1/4" thickness at the nose, 12 1/4" depth and a 1 1/4" deep inside nose.
• Available in square nose only.

• Medium duty stair tread.
• This tread was designed for use in apartment projects and light commercial applications. 
  
• Lower initial cost, ease of installation, ease of cleaning and long service appeals to apartment owners and builders.
• Extra thick at the front, Meets Fed. Spec. RR-T-650E Type B.
• 3/16" thick, 12" deep, 1 1/4" square or curved nose.
• Contains no asbestos fiber, made of first quality homogeneous vinyl, color throughout.
• Specify either square or curved nose.
  

• New design Adjusta-Nose tread easily adjust to steps with angle between 90^o and 60^o.
• Ideal for public buildings where fire safety is a prime concern.
• For use in commercial, industrial or institutional buildings.
• Circular disc, 3/4" diameter, are easy to clean and affords for safer pedestrian traffic.
• Meets Fed. Spec. RR-T-650E.
• Flame spread rating of 25 or less using ASTM-E-84 test.
• Full 1/4" thickness at the nose, 12 1/2" depth and a 1 7/8" deep inside nose, smooth rear border is 3" deep.
• Contains no asbestos fiber and the color extends throughout the thickness of the tread.
  
• Available in standard solid color from Color Series III only.
• Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
• Strips are available in black, beige, brown, gray, red or yellow.

• Heavy gauge sharp-rib design koroseal vinyl tread for your heaviest traffic. 
  
• 1/4" thick at the wear area.
• Meets Fed. Spec. RR-T-650E Type B.
• 1/4" thick, 12" deep.
  
• Contains no asbestos fiber, made of first quality vinyl color throughout.
• Square nose only.

• Unique floor tile with raised circular disc, 3/4" diameter, for better traction.
  
• Circular pattern matches DISCO-O-TREAD stair treads.
• Factory cut 24" x 24" square tiles for fewer joints and quicker installation.
  
• For use in commercial, industrial or institutional buildings.
• 3/16" thick.
  
• Contains no asbestos fiber and the color extends throughout the thickness of the tread.
• Flame spread rating of 25 or less using ASTM-E-84 test.
  
• Select standard color from Series III.
  

• Our LO-DISC tread has the popular round disc design, but in a lighter gauge stair tread.
• Treads have tapered 3/4" disc, raised .025".
• Excellent for lighter traffic stairways.
• Meets Fed. Spec. RR-T-650E and ZZ-T-001237 (GSA-FSS)
• Flame spread rating of 75 or less using ASTM-E-84 test.
• Full 3/16" thickness at the nose, 12 1/4" depth and a 1 1/2" deep inside nose.
• Contains no asbestos fiber and the color extends throughout the thickness of the tread.
• Available in square nose only.
• Select standard color from Color Series I, II, or III.
• Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
• Strips are available in black, beige, brown, gray, red or yellow.

• Diamond design tile is ideal for stair landings, lobbies, aisles, ramps, elevators or entryways.
  
• Diamond design pattern matches diamond design stair treads.
  
• For use in commercial, industrial or institutional buildings.
• 7/32" thick, 24" x 24" factory cut tile.
  
• Contains no asbestos fiber and the color extends throughout the thickness of the tread.
  
• Select standard color from Series I, II, or III.
  

• The original diamond design molded rubber stair tread, half diamond design, half smooth, with a longer adjustable nose.
• Designed to fit pan filled, molded concrete, or terrazzo steps.
• For use in commercial, industrial or institutional buildings.
• Diamond design surface is 6" deep, covers the impact area of pedestrian traffic.
• Meets Fed. Spec. RR-T-650E and ZZ-T-001237 (GSA-FSS)
• Full 1/4" thickness at the nose,12 1/4" depth and a 1 1/4" deep inside nose.
• Contains no asbestos fiber and the color extends throughout the thickness of the tread.
• Available in either square or curved nose.
• Curved nose available in Series I colors only.
• Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
• Strips are available in black, beige, brown, gray, red or yellow.

• Rubberized, textured non-slip is designed for heavy shoe traffic, yet is comfortable enough for bare feet.
• Provides unparalleled coefficient of friction in both industrial and commercial applications.
• Coated with an aggressive adhesive designed with industrial and commercial applications in mind.
• National Flooring Safety Institute Certified for "high traction".
• Available in black or gray.
• Sold in full cases only.

Related Products: #3520

• Comfortable, functional dome design provides excellent relief from back and leg stress.
• 100% Nitrile Rubber, 20% recycled content.
• Passes Flammability Standard DOC-FF-1-70.
• Recommended for retail or commercial application and for work in wet or dry environments.
• To clean, simply sweep, vacuum or hose off as needed.
• Rounded corners add the finishing touches to this attractive high-performance anti-fatigue mat.
• 7/16" thickness.

• Tough mats made from rubberized fabric links woven on heavy galvanized spring steel wire.
• The links are 5/8" thick x 2 1/2" long woven on wires in a v-shaped herringbone design.
• These mats can be used at doorways, behind counters, in the front of work benches, on assembly lines, and in machine shops.
• Custom sizes available.
• Mats with bevel or square nosing are available on special request.
• Mats available up to 7' wide x 25' long in one section.
• Standard size mats do not include nosing.
  

• Rapid drying, solvent based contact adhesive.
• Formulated for bonding rubber and vinyl treads to concrete, terrazzo, metal, marble or wood.
• Brush both surfaces, installs approximately 75 lineal feet of treads per gallon.
• Contains solvent, highly flammable.
• Available in quarts or gallon cans.
  

• The original, continuous, crimp, flexible mat, made from galvanized steel 3/8" deep with 1" x 1" mesh openings.
• It rolls up like carpet for easy cleaning.
• This mat presents a smooth level surface for truly rough and tough scraping jobs.
• This mat is also great for those areas where mud and dirt are a real problem.
• Custom sizes available upon special request.

• This thick, heavy duty mat has done excellent work in kitchens, food processing plants, locker/shower rooms, around swimming pools and behind bars.
• It is compounded to resist grease, oil, acids, and alkalies. 
• Slotted holes provide good drainage.
• This matting gives greater foot-ease and stability.