• New design Adjusta-Nose tread easily adjust to steps with angle between 90^o and 60^o.
• Ideal for public buildings where fire safety is a prime concern.
• For use in commercial, industrial or institutional buildings.
• Circular disc, 3/4" diameter, are easy to clean and affords for safer pedestrian traffic.
• Meets Fed. Spec. RR-T-650E.
• Flame spread rating of 25 or less using ASTM-E-84 test.
• Full 1/4" thickness at the nose, 12 1/2" depth and a 1 7/8" deep inside nose, smooth rear border is 3" deep.
• Contains no asbestos fiber and the color extends throughout the thickness of the tread.
  
• Available in standard solid color from Color Series III only.
• Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
• Strips are available in black, beige, brown, gray, red or yellow.

• Heavy gauge sharp-rib design koroseal vinyl tread for your heaviest traffic. 
  
• 1/4" thick at the wear area.
• Meets Fed. Spec. RR-T-650E Type B.
• 1/4" thick, 12" deep.
  
• Contains no asbestos fiber, made of first quality vinyl color throughout.
• Square nose only.

• Unique floor tile with raised circular disc, 3/4" diameter, for better traction.
  
• Circular pattern matches DISCO-O-TREAD stair treads.
• Factory cut 24" x 24" square tiles for fewer joints and quicker installation.
  
• For use in commercial, industrial or institutional buildings.
• 3/16" thick.
  
• Contains no asbestos fiber and the color extends throughout the thickness of the tread.
• Flame spread rating of 25 or less using ASTM-E-84 test.
  
• Select standard color from Series III.
  

• Same colors as our rubber stair treads.
• Easy to trim in height and length.
• Risers are the same length as the stair treads.
• 1/8" thick, 7" high with a 5/8" toe.

• Our LO-DISC tread has the popular round disc design, but in a lighter gauge stair tread.
• Treads have tapered 3/4" disc, raised .025".
• Excellent for lighter traffic stairways.
• Meets Fed. Spec. RR-T-650E and ZZ-T-001237 (GSA-FSS)
• Flame spread rating of 75 or less using ASTM-E-84 test.
• Full 3/16" thickness at the nose, 12 1/4" depth and a 1 1/2" deep inside nose.
• Contains no asbestos fiber and the color extends throughout the thickness of the tread.
• Available in square nose only.
• Select standard color from Color Series I, II, or III.
• Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
• Strips are available in black, beige, brown, gray, red or yellow.

• LO-DISC design tile matches #0501-800 LO-DISC treads for use on landings.
• 3/4" diameter disc, raised .025" for easier cleaning and gives a safer surface for pedestrian traffic than smooth tiles.
• Meets Fed. Specs. SS-T-312B.
• 1/8" thick, 24" x 24" factory cut tile.
• Contains no asbestos fiber and the color extends throughout the thickness of the tread.
• Select standard color from Series I, II, or III.

• Diamond design tile is ideal for stair landings, lobbies, aisles, ramps, elevators or entryways.
  
• Diamond design pattern matches diamond design stair treads.
  
• For use in commercial, industrial or institutional buildings.
• 7/32" thick, 24" x 24" factory cut tile.
  
• Contains no asbestos fiber and the color extends throughout the thickness of the tread.
  
• Select standard color from Series I, II, or III.
  

• The original diamond design molded rubber stair tread, half diamond design, half smooth, with a longer adjustable nose.
• Designed to fit pan filled, molded concrete, or terrazzo steps.
• For use in commercial, industrial or institutional buildings.
• Diamond design surface is 6" deep, covers the impact area of pedestrian traffic.
• Meets Fed. Spec. RR-T-650E and ZZ-T-001237 (GSA-FSS)
• Full 1/4" thickness at the nose,12 1/4" depth and a 1 1/4" deep inside nose.
• Contains no asbestos fiber and the color extends throughout the thickness of the tread.
• Available in either square or curved nose.
• Curved nose available in Series I colors only.
• Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
• Strips are available in black, beige, brown, gray, red or yellow.

• A cost effective, durable, vinyl runner.
• It's skid and slip resistant pebble surface is easy to maintain and clean.
• This material is great for aisles, walkways, stockrooms and assembly lines.

• Exceptional anti-fatigue performance with unique safety features. Happy Feet mats feature a dense cushion encapsulated within solid, 100% nitrile rubber to protect against deterioration.
• Highly resistant to chemicals, animal fats and petroleum products.
• For added safety, the mats are available with OSHA color-coded borders to help identify sensitive areas.
• Happy Feet is welding safe and static dissipative
• Contains 15% Recycled Rubber Content
• Available in two tough surfaces: 1) Texture Surface for dry to damp workstations where traction is not critical. 2) Grip Surface for wet work stations where maximum traction or scraping is crucial.
• Grippers on the back minimize movement.

Related Products: #467, #477, #490

• Same high quality material as our nomad cushion plus except without a backing.
  
• The open construction allows water to run through the matting.
  
• The matting stays dry and helps to reduce the possibility of slips and falls.
  
• Made for locker rooms, for use around showers, saunas and whirlpools.
• Custom lengths available.
  

• Launderable and highly chemical resistant nitrile rubber backing provides excellent cushion during use, giving maximum durability and longer surface life.
• Comfortable, functional dome design provides excellent relief from back and leg stress.
• 100% Nitrile Rubber, 20% recycled content.
• Passes Flammability Standard DOC-FF-1-70.
• Recommended for retail or commercial applications.
• To clean, simply sweep, vacuum or hose off as needed.
• Rounded corners add the finishing touches to this attractive high-performance anti-fatigue mat.
• Solution dyed polypropylene surface means exceptional stain resistance and ease of maintenance.
• 7/16" thickness.

• Comfortable, functional dome design provides excellent relief from back and leg stress.
• 100% Nitrile Rubber, 20% recycled content.
• Passes Flammability Standard DOC-FF-1-70.
• Recommended for retail or commercial application and for work in wet or dry environments.
• To clean, simply sweep, vacuum or hose off as needed.
• Rounded corners add the finishing touches to this attractive high-performance anti-fatigue mat.
• 7/16" thickness.

• Extra thick, a full 1 1/4" thick mat made for industrial work or process stations.
• Makes operating foot activated controls easier because the operator is upon a cushioned platform.

• Tough mats made from rubberized fabric links woven on heavy galvanized spring steel wire.
• The links are 5/8" thick x 2 1/2" long woven on wires in a v-shaped herringbone design.
• These mats can be used at doorways, behind counters, in the front of work benches, on assembly lines, and in machine shops.
• Custom sizes available.
• Mats with bevel or square nosing are available on special request.
• Mats available up to 7' wide x 25' long in one section.
• Standard size mats do not include nosing.
  

• Stock mats include one, 10' grounding cord with snap on one end and round terminal on the other end.
• It is recommended that that there be one grounding cord for every 10' of matting.
• Cord should be attached to the mat and to a grounded wall outlet.
• For personnel unfamiliar with making electrical connections, it is recommended that the ground connection be done by a licensed electrician.

• A water based contact adhesive for bonding rubber and vinyl stair treads and risers to concrete, wood, terrazzo, metal or marble.
• Brush on both surfaces
• Installs approximately 75 feet of treads per gallon.
  
• Available in quart or gallon cans.
  

• Epoxy nose caulk should be used on all stair treads installations.
• It is necessary when Adjusta-Nose treads are being installed or when the step nosing is worn, broken or rounded.
• This two part epoxy will fill voids at the nose and give needed support underneath the stair tread nosing.
• Can also be used to repair surface of step.
  
• Available in quart units.
  

• A latex adhesive for installation of rubber flooring or tiles over suspended wood or suspended concrete floors and over suitable on grade concrete floors.
• May be used with rubber stair treads.
• Where excessive moisture exist, installation is not recommended.
• Environmentally friendly.
• Covers approximately 150 square feet per gallon, single coat.
  
• Available in gallon can or 4 gallon pail.
  

• Lightweight, slip-resistant delineated walkway and safety stand zone matting.
• The mats alternating color blocks make it ideal for businesses with queuing customers or workplaces with standing employees.
• Single tiered & contours to uneven surgaces and comfortable to stand on.
• Etched surface, open grid construction for excellent drainage.
• Certfied slip resistant.
• Sold in 84' Rolls.
• Quick to install and remove if needed.
• Easy cleaned & resistant to most acids, alkali, and oils.
• ASTM 1677: 1.0/0.9.

• Vynagrip is made from two layers of non-porous, flexible PVC that are welded together to create extra strong joints.
• These mats are impervious to oils, grease, acids and alkalis.
• Vynagrip has a specially embossed slip resistant surface.
• Available with the additional benefit of yellow edges to mark routes and promote safety.
• Mat is hygienic, easy to clean, and provides excellent cushioning properties
• 5/8" thick.
• Sold in 33' full rolls only.
  

• Comfort King offers triple the resiliency of other vinyl foam mats.
• Out performs other vinyl foam products in low temperature applications.
• It's extended durability keeps it performing twice as long as typical pebble mats and three times longer than ribbed surface products.
• Comfort-King reduces strain on feet, ankles, legs, and lower back.
• This mat induces natural flexing of the muscles, reducing the build-up of lactic acid that causes fatigue.
• Available in standard 3/8" or supreme 1/2" thickness.
• See #0605S for Comfort-King with yellow border.
• Custom sizes available.