Highest quality rubber gym flooring available. Offers extreme durability and can be found in many different applications. FloorScore Certified and may quality for LEED credits. High shock absorbency and long-wearing toughness make tile lock rubber gym tiles the popular choice for all types of athletic facilities. Interlocking tiles are...

Made of extruded 6063 aluminum alloy and are fabricated to exact dimensions to insure fit to the mat. Frames are supplied with mitered corners and shipped unassembled with all necessary anchor keys and corner pins. Frames must be assembled at the job site and installed so that upper edge...

Outdoor Recycled Rubber Stair Tread is an excellent tread for exterior applications. Made from 100% recycled tires. Diamond design surface is 9" deep with a 3" smooth back border. Full 1/4" thickness at the nose, 12 1/4" depth and a 1 1/4" deep inside nose. Available in square nose...

Solid color cove risers match our vinyl stair treads. Easy to trim in height and length. Risers are the same length as the stair treads. 1/8" thick, 7" high with a 5/8" toe. Ribbed back for better adhesion. Available in Black, Brown, Gray, or Sand. ...

Medium duty stair tread. This tread was designed for use in apartment projects and light commercial applications.  Lower initial cost, ease of installation, ease of cleaning and long service appeals to apartment owners and builders. Extra thick at the front, Meets Fed. Spec. RR-T-650E Type B. 3/16" thick, 12"...

Light duty stairwell tread. Lower initial cost tread designed for multi-family dwellings, apartment houses and light residential applications. Flat rib surface is easy to clean. Meets Fed. Spec. RR-T-650E Type B. 1/8" thick, 12" deep, 1 3/4" long square nose. Contains no asbestos fiber, made of first quality homogeneous...

New design Adjusta-Nose tread easily adjust to steps with angle between 90o and 60o. Ideal for public buildings where fire safety is a prime concern. For use in commercial, industrial or institutional buildings. Circular disc, 3/4" diameter, are easy to clean and affords for safer pedestrian traffic. Meets Fed....

Heavy gauge sharp-rib design koroseal vinyl tread for your heaviest traffic.  1/4" thick at the wear area. Meets Fed. Spec. RR-T-650E Type B. 1/4" thick, 12" deep. Contains no asbestos fiber, made of first quality vinyl color throughout. Square nose only. ...

Unique floor tile with raised circular disc, 3/4" diameter, for better traction. Circular pattern matches DISCO-O-TREAD stair treads. Factory cut 24" x 24" square tiles for fewer joints and quicker installation. For use in commercial, industrial or institutional buildings. 3/16" thick. Contains no asbestos fiber and the color extends...

Same colors as our rubber stair treads. Easy to trim in height and length. Risers are the same length as the stair treads. 1/8" thick, 7" high with a 5/8" toe. ...

Our LO-DISC tread has the popular round disc design, but in a lighter gauge stair tread. Treads have tapered 3/4" disc, raised .025". Excellent for lighter traffic stairways. Meets Fed. Spec. RR-T-650E and ZZ-T-001237 (GSA-FSS) Flame spread rating of 75 or less using ASTM-E-84 test. Full 3/16" thickness at...

LO-DISC design tile matches #0501-800 LO-DISC treads for use on landings. 3/4" diameter disc, raised .025" for easier cleaning and gives a safer surface for pedestrian traffic than smooth tiles. Meets Fed. Specs. SS-T-312B. 1/8" thick, 24" x 24" factory cut tile. Contains no asbestos fiber and the color...

Diamond design tile is ideal for stair landings, lobbies, aisles, ramps, elevators or entryways. Diamond design pattern matches diamond design stair treads. For use in commercial, industrial or institutional buildings. 7/32" thick, 24" x 24" factory cut tile. Contains no asbestos fiber and the color extends throughout the thickness...

The original diamond design molded rubber stair tread, half diamond design, half smooth, with a longer adjustable nose. Designed to fit pan filled, molded concrete, or terrazzo steps. For use in commercial, industrial or institutional buildings. Diamond design surface is 6" deep, covers the impact area of pedestrian traffic....

A water based contact adhesive for bonding rubber and vinyl stair treads and risers to concrete, wood, terrazzo, metal or marble. Brush on both surfaces Installs approximately 75 feet of treads per gallon. Available in quart or gallon cans. ...

Epoxy nose caulk should be used on all stair treads installations. It is necessary when Adjusta-Nose treads are being installed or when the step nosing is worn, broken or rounded. This two part epoxy will fill voids at the nose and give needed support underneath the stair tread nosing....

A latex adhesive for installation of rubber flooring or tiles over suspended wood or suspended concrete floors and over suitable on grade concrete floors. May be used with rubber stair treads. Where excessive moisture exist, installation is not recommended. Environmentally friendly. Covers approximately 150 square feet per gallon, single...

A two part epoxy adhesive for installation of Disc-O-Tile and Disc-O-Tread. It is the only recommended adhesive for below grade flooring installation. Each unit contains a Part "A" and Part "B" packed in one gallon cans to be mixed to produce one gallon of adhesive. One unit will cover...