View All
-
Traction Tread Rubber Runner MatsSlip-resistant floor protection matting made from chemical-resistant 100% Nitrile rubber. Traction Tread rubber runners are UV protected, anti-static and ideal for numerous production locations, walkways, gym floor protection, parts counters, lab areas and food service applications. Passes Flammability Standard DOC-FF-1-70. Slip Resistant Surface: ASTM C10280-96 Dry- .92 Wet- .86...
- Slip-resistant floor protection matting made from chemical-resistant 100% Nitrile rubber.
- Traction Tread rubber runners are UV protected, anti-static and ideal for numerous production locations, walkways, gym floor protection, parts counters, lab areas and food service applications.
- Passes Flammability Standard DOC-FF-1-70.
- Slip Resistant Surface: ASTM C10280-96 Dry- .92 Wet- .86 Certified slip-resistant by the National Floor Safety Institute.
- Nitrile rubber construction allows for use in environments that are exposed to animal fats and petroleum products.
- Welding Safe Recommended uses:
- Kitchens, gym floors and wet areas, walkways, parts counters, lab areas, and food service applications.
Show More
-
Anti-Vibration PadsWhen properly sized and installed under machines, these solid neoprene pads prolong machine life, reduce maintenance costs, dampen vibration, and isolate noise telegraphed through the floor. Pads are engineered for a maximum load capacity of 50 psi. Each pad is 3/8" x 18" x 18" Can be cut to...
- When properly sized and installed under machines, these solid neoprene pads prolong machine life, reduce maintenance costs, dampen vibration, and isolate noise telegraphed through the floor.
- Pads are engineered for a maximum load capacity of 50 psi.
- Each pad is 3/8" x 18" x 18"
- Can be cut to fit your application.
Show More
-
Acrylic Desk Chair MatsCrystal clear mats that let the beauty of your fine carpeting or flooring be seen, but protected from dirt and marring. These mats are constructed of an acrylic sheet with smooth rounded edges. Available in 1/4" or 3/8" thickness. Custom cut to your specifications. Mats can not be shipped...
- Crystal clear mats that let the beauty of your fine carpeting or flooring be seen, but protected from dirt and marring.
- These mats are constructed of an acrylic sheet with smooth rounded edges.
- Available in 1/4" or 3/8" thickness.
- Custom cut to your specifications.
- Mats can not be shipped UPS.
- Acrylic mats carry no warranty.
Show More
-
Mat Recess FrameMade of extruded 6063 aluminum alloy and are fabricated to exact dimensions to insure fit to the mat. Frames are supplied with mitered corners and shipped unassembled with all necessary anchor keys and corner pins. Frames must be assembled at the job site and installed so that upper edge...
- Made of extruded 6063 aluminum alloy and are fabricated to exact dimensions to insure fit to the mat.
- Frames are supplied with mitered corners and shipped unassembled with all necessary anchor keys and corner pins.
- Frames must be assembled at the job site and installed so that upper edge is level with finished floor surface.
- The frame should be anchored into cement with anchor keys a minimum of 24" on centers.
- Corner pins should be installed at all corners of frame.
- For use on mats of 3/8" - 5/8" thickness
- "Dimensions" are inside frame dimensions.
Show More
-
Matlock Non-Skid BackingSlip resistant backing to help prevent a mat from moving on hard surfaces such as wood, ceramic tile, marble, linoleum, etc. Available on most vinyl backed carpet mats. Ask customer service for more information. ...
- Slip resistant backing to help prevent a mat from moving on hard surfaces such as wood, ceramic tile, marble, linoleum, etc.
- Available on most vinyl backed carpet mats.
- Ask customer service for more information.
Show More
-
Rug-Hugger Non-Skid BackingAnti-slip backing designed for mats used on top of cut pile carpeting. Available on most vinyl backed mats. Ask customer service for more information. ...
- Anti-slip backing designed for mats used on top of cut pile carpeting.
- Available on most vinyl backed mats.
- Ask customer service for more information.
Show More
-
Renovation Stair TreadsOur renovation treads are manufactured of high quality, heavy duty extruded aluminum with our exclusive safety traction surface. 9" or 11" depth covers most applcations. 9/32" thick with 1 1/8" nose. 9" treads available up to 144' in one section and 11" treads available up to 96' in one...
- Our renovation treads are manufactured of high quality, heavy duty extruded aluminum with our exclusive safety traction surface.
- 9" or 11" depth covers most applcations.
- 9/32" thick with 1 1/8" nose.
- 9" treads available up to 144' in one section and 11" treads available up to 96' in one section.
- Treads install easily over existing worn stairways of concrete, wood, steel or terrazzo.
- Available with optional sightline or glow in the dark front edge at an additional cost.
- Holes are drilled and countersunk unless otherwise specified.
Show More
-
Strip DoorsStrip doors provide see through barriers that allow quick and easy passage of personnel, products, and equipment. They can be manufactured to accommodate any size door opening. Strip doors are effective in conserving energy and provide a barrier for dust control. Various widths, styles and colors are available. Call...
- Strip doors provide see through barriers that allow quick and easy passage of personnel, products, and equipment.
- They can be manufactured to accommodate any size door opening.
- Strip doors are effective in conserving energy and provide a barrier for dust control.
- Various widths, styles and colors are available.
- Call Customer Service for pricing.
Show More
-
Super Scrape Rubber Logo MatsSuper Scrape rubber logo mats, built for the challenges of busy doorways, combine rugged utility with brand reinforcement. These custom logo rubber mats are your frontline defense against the toughest dirt and debris while also displaying your corporate image. The all-rubber logo mat construction ensures exceptional durability and easy...
Super Scrape rubber logo mats, built for the challenges of busy doorways, combine rugged utility with brand reinforcement. These custom logo rubber mats are your frontline defense against the toughest dirt and debris while also displaying your corporate image. The all-rubber logo mat construction ensures exceptional durability and easy maintenance. Here are just some of their main characteristics:
- Super Scrape Rubber Logo Mats offer a superior printing surface for your company logo or Promotional message
- Multi-color images are created by molding a digitally printed polymeric material into durable Nitrile rubber
- These long-lasting logo mats perform beautifully in all types of environments
- The high-traction surface effectively removes and traps tough dirt, grime and water from shoes
- Photo-realistic images, print ready artwork, tones and shades are all produced with unparalleled detail and clarity. 150 standard color options available.
- PMS color matching available with an upcharge.
- 3/16” thickness.
- Resistant to oils and chemicals.
- Upload your artwork for free proof.
Opt for our Super Scraper rubber logo mats to receive more than just a mat; you’ll receive an experience and a partnership that prioritizes longevity and customized brand representation. Trust in our expertise to provide a product that stands the test of time while upholding your company's professional aesthetic. Contact us today to learn more about our catalog of products and let us help you improve your business.
Show More
-
Safety Track Non-Skid Tape - CoarseThis material fits your specific needs, in assorted shapes and sizes. Assists in preventing costly slip and fall accidents and helps in complying with strict OSHA safety standards. This material can be used indoors or out, wet or dry, even around oil and grease. It goes on like tape...
- This material fits your specific needs, in assorted shapes and sizes.
- Assists in preventing costly slip and fall accidents and helps in complying with strict OSHA safety standards.
- This material can be used indoors or out, wet or dry, even around oil and grease.
- It goes on like tape to a clean, dry surface and is ready for immediate service.
Show More
-
Super Scrape Rubber MatsEffectively scrapes tough dirt and grime off feet. Durable 100% nitrile-rubber mat provides slip-resistant surface. Grease resistant. Mat has 20% recycled nitrile rubber content. Available with safety messages, a welcome message or custom logos. See item #3559 for logo options. Ideal for kitchens, locker rooms, slippery inclines, restaurants, production...
- Effectively scrapes tough dirt and grime off feet.
- Durable 100% nitrile-rubber mat provides slip-resistant surface.
- Grease resistant.
- Mat has 20% recycled nitrile rubber content.
- Available with safety messages, a welcome message or custom logos.
- See item #3559 for logo options.
- Ideal for kitchens, locker rooms, slippery inclines, restaurants, production areas and outside entrances.
- Certified slip resistant by the National Floor Safety Institute.
- Available in standard oblong face pattern or optional face pattern.
- Smooth rubber backing.
- 3/16" thick
Show More
-
Safety-Striped Comfort King Anti-Fatigue MattingComfort King offers triple the resiliency of other vinyl foam mats. Bright yellow border increases worker awareness. Out performs other vinyl foam products in low temperature applications. It's extended durability keeps it performing twice as long as typical pebble mats and three times longer than ribbed surface products. Comfort-King...
- Comfort King offers triple the resiliency of other vinyl foam mats.
- Bright yellow border increases worker awareness.
- Out performs other vinyl foam products in low temperature applications.
- It's extended durability keeps it performing twice as long as typical pebble mats and three times longer than ribbed surface products.
- Comfort-King reduces strain on feet, ankles, legs, and lower back.
- This mat induces natural flexing of the muscles, reducing the build-up of lactic acid that causes fatigue.
- Available in standard 3/8" or supreme 1/2" thickness.
- See #0605 for Comfort-King without yellow border.
- Custom sizes available in 2', 3', and 4' material only.
Show More
-
Perfec Clean 3/8" Rollup Mats - Aluminum HingeGreat for high traffic areas, these aluminum walk-off entrance mats allow drainage for water and snow while collecting dirt and debris. Protect your floors from damage, your guests from slips and falls, all while improving the feel and look to your building entrances. Our aluminum entrance mats are completely made...
Great for high traffic areas, these aluminum walk-off entrance mats allow drainage for water and snow while collecting dirt and debris. Protect your floors from damage, your guests from slips and falls, all while improving the feel and look to your building entrances. Our aluminum entrance mats are completely made in America to exceed the criteria needed to meet the Buy American Act (BAA)requirements and are built to last.
- Develop unique color variations to fashion the perfect entrance.
- Able to withstand years of wear under the heaviest of trafficked areas.
- Can be installed and used for both recessed or surface mounted applications. Can accommodate recess depths between 3/8" and 7/16". Surface mounted will require one of the beveled/ramped perimeter frames be used to avoid creating a tripping hazard.
- Tread rails shall be 6063-T52 aluminum, spaced 2" on center and connected with a long lasting, size retentive aluminum hinge with 1" x 3/16" slotted holes for maximum drainage.
- 300 lbs./wheel rolling load weight capacity.
- Several options to choose from on aluminum finish, tread insert type and colors.
Show More
-
Perfec Clean 3/8" Rollup Mats - Rubber HingeGreat for high traffic areas, these rubber hinge walk-off entrance mats absorb noise from foot traffic, protect guests from slips and falls, allow water to drain, and collect dirt and debris. Protect your floors from damage, while improving the feel and look to your building entrances. Our aluminum entrance mats...
Great for high traffic areas, these rubber hinge walk-off entrance mats absorb noise from foot traffic, protect guests from slips and falls, allow water to drain, and collect dirt and debris. Protect your floors from damage, while improving the feel and look to your building entrances. Our aluminum entrance mats are completely made in America to exceed the criteria needed to meet the Buy American Act (BAA)requirements and are built to last.
- Develop unique color variations to fashion the perfect entrance.
- Able to withstand years of wear under the heaviest of trafficked areas.
- Can be installed and used for both recessed or surface mounted applications. Can accommodate recess depths between 3/8" and 7/16". Surface mounted will require one of the beveled/ramped perimeter frames be used to avoid creating a tripping hazard.
- Tread rails shall be 6063-T52 aluminum, spaced 2" on center and connected with a long lasting, size retentive aluminum hinge with 1" x 3/16" slotted holes for maximum drainage.
- 300 lbs./wheel rolling load weight capacity.
- Several options to choose from on aluminum finish, tread insert type and colors.
Show More
-
Perfec Clean 3/4" Rollup Grate - Rubber HingePerfec 3/4" Rollup Grates are an excellent choice for high traffic areas. The rubber hinges soften noises, while the deep pit design allows debris to fall beneath the mat. These roll-up design allows easy access for cleaning under the mat. Can be custom designed to accommodate any size entry...
Perfec 3/4" Rollup Grates are an excellent choice for high traffic areas. The rubber hinges soften noises, while the deep pit design allows debris to fall beneath the mat. These roll-up design allows easy access for cleaning under the mat.
- Can be custom designed to accommodate any size entry
- Can be rolled up for easy clean under the grates
- Insert Options include Carpet, Polypropolene Brush, Diamond Peak Vinyl, and Serrated Anodized Aluminum
- Each insert option has various colors to enhance the desired entry characteristics
- Can handle loads up to 1,000 LBS per wheel
- Various Frame options for Pit-Embedded grates
Show More
-
Perfec Clean 1-5/8" GrateThe Perfec Grate is the ideal solution for high traffic areas. The deep pit design allows rain, snow, dirt, and debris to fall beneath the mat to maintain maximum slip resistance and dirt removal. These rigid grates are designed by locking and welding together for maximum strength while being...
The Perfec Grate is the ideal solution for high traffic areas. The deep pit design allows rain, snow, dirt, and debris to fall beneath the mat to maintain maximum slip resistance and dirt removal. These rigid grates are designed by locking and welding together for maximum strength while being easily removed by undocking each section.
- Can be custom designed to accommodate any size entry
- Can be removed for easy clean under the grates
- Insert Options include Carpet, Polypropolene Brush, Diamond Peak Vinyl, and Serrated Anodized Aluminum
- Each insert option has various colors to enhance the desired entry characteristics
- Various Frame options for Pit-Embedded grates
Show More
-
WP-70 Non-Skid Epoxy CoatingTrowel on, 2 part epoxy system for extreme, durable, long lasting solution. For industries, such as breweries, canneries, or off-shore drilling platforms. Extra thick consistency requires trowel and squeegee application. Packed 1 gallon kit per case. 25 - 30 square feet coverage per gallon. No flash or volatile solvents,...
- Trowel on, 2 part epoxy system for extreme, durable, long lasting solution.
- For industries, such as breweries, canneries, or off-shore drilling platforms.
- Extra thick consistency requires trowel and squeegee application.
- Packed 1 gallon kit per case.
- 25 - 30 square feet coverage per gallon.
- No flash or volatile solvents, low voc.
- 18 - 24 hour cure time.
- 30 - 60 minute pot life once mixed.
- Squeegee and mixing blade not included.
Show More
-
Oil Trap Absorbent Mat Pads with TrayOil trap absorbant mat pads and tray combine absorption with mid-range abrasion resistance to trap grime from boots and wheel trucks. 100% recycled post-consumer fibers soak up oils, coolants, solvents, and water. Abrasion-resistant qualities make it ideal for areas with moderate foot traffic. Excellant for walkways into offices and...
- Oil trap absorbant mat pads and tray combine absorption with mid-range abrasion resistance to trap grime from boots and wheel trucks.
- 100% recycled post-consumer fibers soak up oils, coolants, solvents, and water.
- Abrasion-resistant qualities make it ideal for areas with moderate foot traffic.
- Excellant for walkways into offices and other finished areas.
- Includes reusalbe nitrile rubber tray and 12 disposable pads.
Show More
-
Dri-Dek Interlocking Tiles12" x 12" interlocking modular tiles for those areas where safety and comfort are critical. Open design allows water and debris to fall through the tile and out the drain. Tiles snap quickly together and can be easily trimmed to fit wall to wall applications. Perfect for showers, saunas,...
- 12" x 12" interlocking modular tiles for those areas where safety and comfort are critical.
- Open design allows water and debris to fall through the tile and out the drain.
- Tiles snap quickly together and can be easily trimmed to fit wall to wall applications.
- Perfect for showers, saunas, locker rooms, or any work station.
- Contains Oxy-B1 vinyl to inhibit growth of mold, mildew, and bacteria.
Show More
-
Disc-O Tread Rubber Stair TreadsNew design Adjusta-Nose tread easily adjust to steps with angle between 90o and 60o. Ideal for public buildings where fire safety is a prime concern. For use in commercial, industrial or institutional buildings. Circular disc, 3/4" diameter, are easy to clean and affords for safer pedestrian traffic. Meets Fed....
- New design Adjusta-Nose tread easily adjust to steps with angle between 90o and 60o.
- Ideal for public buildings where fire safety is a prime concern.
- For use in commercial, industrial or institutional buildings.
- Circular disc, 3/4" diameter, are easy to clean and affords for safer pedestrian traffic.
- Meets Fed. Spec. RR-T-650E.
- Flame spread rating of 25 or less using ASTM-E-84 test.
- Full 1/4" thickness at the nose, 12 1/2" depth and a 1 7/8" deep inside nose, smooth rear border is 3" deep.
- Contains no asbestos fiber and the color extends throughout the thickness of the tread.
- Available in standard solid color from Color Series III only.
- Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
- Strips are available in black, beige, brown, gray, red or yellow.
Show More
-
Heavy Duty Vinyl Stair TreadsHeavy gauge sharp-rib design koroseal vinyl tread for your heaviest traffic. 1/4" thick at the wear area. Meets Fed. Spec. RR-T-650E Type B. 1/4" thick, 12" deep. Contains no asbestos fiber, made of first quality vinyl color throughout. Square nose only. ...
- Heavy gauge sharp-rib design koroseal vinyl tread for your heaviest traffic.
- 1/4" thick at the wear area.
- Meets Fed. Spec. RR-T-650E Type B.
- 1/4" thick, 12" deep.
- Contains no asbestos fiber, made of first quality vinyl color throughout.
- Square nose only.
Show More
- Heavy gauge sharp-rib design koroseal vinyl tread for your heaviest traffic.
-
Disc-O-Tile Rubber TileUnique floor tile with raised circular disc, 3/4" diameter, for better traction. Circular pattern matches DISCO-O-TREAD stair treads. Factory cut 24" x 24" square tiles for fewer joints and quicker installation. For use in commercial, industrial or institutional buildings. 3/16" thick. Contains no asbestos fiber and the color extends...
- Unique floor tile with raised circular disc, 3/4" diameter, for better traction.
- Circular pattern matches DISCO-O-TREAD stair treads.
- Factory cut 24" x 24" square tiles for fewer joints and quicker installation.
- For use in commercial, industrial or institutional buildings.
- 3/16" thick.
- Contains no asbestos fiber and the color extends throughout the thickness of the tread.
- Flame spread rating of 25 or less using ASTM-E-84 test.
- Select standard color from Series III.
Show More
- Unique floor tile with raised circular disc, 3/4" diameter, for better traction.
-
Lo-Disc Design Rubber Stair TreadsOur LO-DISC tread has the popular round disc design, but in a lighter gauge stair tread. Treads have tapered 3/4" disc, raised .025". Excellent for lighter traffic stairways. Meets Fed. Spec. RR-T-650E and ZZ-T-001237 (GSA-FSS) Flame spread rating of 75 or less using ASTM-E-84 test. Full 3/16" thickness at...
- Our LO-DISC tread has the popular round disc design, but in a lighter gauge stair tread.
- Treads have tapered 3/4" disc, raised .025".
- Excellent for lighter traffic stairways.
- Meets Fed. Spec. RR-T-650E and ZZ-T-001237 (GSA-FSS)
- Flame spread rating of 75 or less using ASTM-E-84 test.
- Full 3/16" thickness at the nose, 12 1/4" depth and a 1 1/2" deep inside nose.
- Contains no asbestos fiber and the color extends throughout the thickness of the tread.
- Available in square nose only.
- Select standard color from Color Series I, II, or III.
- Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
- Strips are available in black, beige, brown, gray, red or yellow.
Show More
-
Lo-Disc Design Rubber TileLO-DISC design tile matches #0501-800 LO-DISC treads for use on landings. 3/4" diameter disc, raised .025" for easier cleaning and gives a safer surface for pedestrian traffic than smooth tiles. Meets Fed. Specs. SS-T-312B. 1/8" thick, 24" x 24" factory cut tile. Contains no asbestos fiber and the color...
- LO-DISC design tile matches #0501-800 LO-DISC treads for use on landings.
- 3/4" diameter disc, raised .025" for easier cleaning and gives a safer surface for pedestrian traffic than smooth tiles.
- Meets Fed. Specs. SS-T-312B.
- 1/8" thick, 24" x 24" factory cut tile.
- Contains no asbestos fiber and the color extends throughout the thickness of the tread.
- Select standard color from Series I, II, or III.
Show More
-
Diamond Design Rubber Stair TreadsThe original diamond design molded rubber stair tread, half diamond design, half smooth, with a longer adjustable nose. Designed to fit pan filled, molded concrete, or terrazzo steps. For use in commercial, industrial or institutional buildings. Diamond design surface is 6" deep, covers the impact area of pedestrian traffic....
- The original diamond design molded rubber stair tread, half diamond design, half smooth, with a longer adjustable nose.
- Designed to fit pan filled, molded concrete, or terrazzo steps.
- For use in commercial, industrial or institutional buildings.
- Diamond design surface is 6" deep, covers the impact area of pedestrian traffic.
- Meets Fed. Spec. RR-T-650E and ZZ-T-001237 (GSA-FSS)
- Full 1/4" thickness at the nose,12 1/4" depth and a 1 1/4" deep inside nose.
- Contains no asbestos fiber and the color extends throughout the thickness of the tread.
- Available in either square or curved nose.
- Curved nose available in Series I colors only.
- Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
- Strips are available in black, beige, brown, gray, red or yellow.
Show More
-
Air Flex Anti-Fatigue Mats - Fabric TopLaunderable and highly chemical resistant nitrile rubber backing provides excellent cushion during use, giving maximum durability and longer surface life. Comfortable, functional dome design provides excellent relief from back and leg stress. 100% Nitrile Rubber, 20% recycled content. Passes Flammability Standard DOC-FF-1-70. Recommended for retail or commercial applications. To...
- Launderable and highly chemical resistant nitrile rubber backing provides excellent cushion during use, giving maximum durability and longer surface life.
- Comfortable, functional dome design provides excellent relief from back and leg stress.
- 100% Nitrile Rubber, 20% recycled content.
- Passes Flammability Standard DOC-FF-1-70.
- Recommended for retail or commercial applications.
- To clean, simply sweep, vacuum or hose off as needed.
- Rounded corners add the finishing touches to this attractive high-performance anti-fatigue mat.
- Solution dyed polypropylene surface means exceptional stain resistance and ease of maintenance.
- 7/16" thickness.
Show More
-
Air Flex Anti-Fatigue Mats - Rubber TopComfortable, functional dome design provides excellent relief from back and leg stress. 100% Nitrile Rubber, 20% recycled content. Passes Flammability Standard DOC-FF-1-70. Recommended for retail or commercial application and for work in wet or dry environments. To clean, simply sweep, vacuum or hose off as needed. Rounded corners add...
- Comfortable, functional dome design provides excellent relief from back and leg stress.
- 100% Nitrile Rubber, 20% recycled content.
- Passes Flammability Standard DOC-FF-1-70.
- Recommended for retail or commercial application and for work in wet or dry environments.
- To clean, simply sweep, vacuum or hose off as needed.
- Rounded corners add the finishing touches to this attractive high-performance anti-fatigue mat.
- 7/16" thickness.
Show More
-
Double Thick Super Foot Lover MatsExtra thick, a full 1 1/4" thick mat made for industrial work or process stations. Makes operating foot activated controls easier because the operator is upon a cushioned platform. ...
- Extra thick, a full 1 1/4" thick mat made for industrial work or process stations.
- Makes operating foot activated controls easier because the operator is upon a cushioned platform.
Show More
-
Tire Link MatsTough mats made from rubberized fabric links woven on heavy galvanized spring steel wire. The links are 5/8" thick x 2 1/2" long woven on wires in a v-shaped herringbone design. These mats can be used at doorways, behind counters, in the front of work benches, on assembly lines,...
- Tough mats made from rubberized fabric links woven on heavy galvanized spring steel wire.
- The links are 5/8" thick x 2 1/2" long woven on wires in a v-shaped herringbone design.
- These mats can be used at doorways, behind counters, in the front of work benches, on assembly lines, and in machine shops.
- Custom sizes available.
- Mats with bevel or square nosing are available on special request.
- Mats available up to 7' wide x 25' long in one section.
- Standard size mats do not include nosing.
Show More
-
Grounding CordStock mats include one, 10' grounding cord with snap on one end and round terminal on the other end. It is recommended that that there be one grounding cord for every 10' of matting. Cord should be attached to the mat and to a grounded wall outlet. For personnel...
- Stock mats include one, 10' grounding cord with snap on one end and round terminal on the other end.
- It is recommended that that there be one grounding cord for every 10' of matting.
- Cord should be attached to the mat and to a grounded wall outlet.
- For personnel unfamiliar with making electrical connections, it is recommended that the ground connection be done by a licensed electrician.
Show More
-
Rotary Table & Rig Floor MatsOur Rotary Table & Rig Floor Mats are designed to provide a safe and durable traction surface in your marine and offshore applications. Manufactured from a high impact industrial polyurethane for years of service. Custom sizes and shapes are designed to promote safety and employee awareness. ...
- Our Rotary Table & Rig Floor Mats are designed to provide a safe and durable traction surface in your marine and offshore applications.
- Manufactured from a high impact industrial polyurethane for years of service.
- Custom sizes and shapes are designed to promote safety and employee awareness.
Show More
-
#400 Neoprene Contact AdhesiveRapid drying, solvent based contact adhesive. Formulated for bonding rubber and vinyl treads to concrete, terrazzo, metal, marble or wood. Brush both surfaces, installs approximately 75 lineal feet of treads per gallon. Contains solvent, highly flammable. Available in quarts or gallon cans. ...
- Rapid drying, solvent based contact adhesive.
- Formulated for bonding rubber and vinyl treads to concrete, terrazzo, metal, marble or wood.
- Brush both surfaces, installs approximately 75 lineal feet of treads per gallon.
- Contains solvent, highly flammable.
- Available in quarts or gallon cans.
Show More
-
#300 Water Based Contact AdhesiveA water based contact adhesive for bonding rubber and vinyl stair treads and risers to concrete, wood, terrazzo, metal or marble. Brush on both surfaces Installs approximately 75 feet of treads per gallon. Available in quart or gallon cans. ...
- A water based contact adhesive for bonding rubber and vinyl stair treads and risers to concrete, wood, terrazzo, metal or marble.
- Brush on both surfaces
- Installs approximately 75 feet of treads per gallon.
- Available in quart or gallon cans.
Show More
-
#110 Epoxy Nose CaulkEpoxy nose caulk should be used on all stair treads installations. It is necessary when Adjusta-Nose treads are being installed or when the step nosing is worn, broken or rounded. This two part epoxy will fill voids at the nose and give needed support underneath the stair tread nosing....
- Epoxy nose caulk should be used on all stair treads installations.
- It is necessary when Adjusta-Nose treads are being installed or when the step nosing is worn, broken or rounded.
- This two part epoxy will fill voids at the nose and give needed support underneath the stair tread nosing.
- Can also be used to repair surface of step.
- Available in quart units.
Show More
-
#560 Rubber Flooring AdhesiveA latex adhesive for installation of rubber flooring or tiles over suspended wood or suspended concrete floors and over suitable on grade concrete floors. May be used with rubber stair treads. Where excessive moisture exist, installation is not recommended. Environmentally friendly. Covers approximately 150 square feet per gallon, single...
- A latex adhesive for installation of rubber flooring or tiles over suspended wood or suspended concrete floors and over suitable on grade concrete floors.
- May be used with rubber stair treads.
- Where excessive moisture exist, installation is not recommended.
- Environmentally friendly.
- Covers approximately 150 square feet per gallon, single coat.
- Available in gallon can or 4 gallon pail.
Show More